Honeywell SiXCT Posts

Sometimes we like to speculate about security system sensors and equipment that, for whatever reason, has yet to be announced for built by manufacturers. Today, we're going to discuss some sensor ideas that we wish existed in reality, but for now only remain ideas inside of our own heads.

Keep in mind that while these ideas may seem very plausible and realistic, they are still nothing more than ideas at this point. None of these ideas have been announced or mentioned by manufacturers, and it's likely that these concepts may never become a reality. This is just for fun, and we're merely floating around ideas. Don't get your hopes up and expect these sensors to be available on our website any time soon. And if you happen to be a manufacturer reading this, then take notes, as we think these products could be big hits.

PowerG Heat Sensor

The PowerG lineup is known for its excellent diversity, as it offers sensors of nearly all types. But one sensor that is noticeably absent from this lineup is a standalone heat sensor. We regularly get requests from Qolsys IQ Panel 2 Plus users who want a fire detection sensor for use in an area where a conventional smoke detector would be prone to false alarms. Such areas can include kitchens, garages, bathrooms, and attics.

We're pretty surprised that Johnson Controls hasn't produced a standalone heat sensor option for their PowerG lineup yet. It could be as simple as making it so that you can disable smoke detection on a dual-function smoke & heat sensor. This is already possible with the Honeywell SiXSMOKE, so we're sure this could be done for the DSC PG9936 as well. On that note, we would also love to see a PowerG equivalent to the Honeywell SiXCOMBO and finally give PowerG System users a truly complete life-safety sensor option with built-in smoke, heat, and carbon monoxide detection.

Honeywell SiX Series Recessed Contact

This is another one we're a little surprised isn't already a thing. While Resideo has been somewhat choosy about which sensor types to make available for the Honeywell SiX Series Lineup, most of the omissions are understandable. But the absence of a recessed door and window contact is a bit of a head-scratcher. Resideo has produced many wireless and wired recessed contacts in the past, so we're not quite sure why they would forget to make an encrypted option for the massively popular Lyric Controller. One theory we have its that they are afraid the wireless signal range would be too lackluster.

While quite not as popular as surface-mount contacts due to the hole-drilling that is required, recessed contacts are appreciated by many users who want an aesthetically pleasing install. It's not like Resideo doesn't already know this. We have seen them offer a wide selection recessed contacts in the past. The company previously went out of their way to make the Honeywell SiXMINICT after the standard Honeywell SiXCT was deemed by many to be too bulky. For now, Lyric users remain stuck using non-encrypted devices like the Honeywell 5818MNL if they want to add recessed door and window contacts to their systems.

Qolsys Dual-Tech Motion Sensor

We've gotten the impression in recent times that Qolsys isn't really making their 319.5 MHz S-Line Sensors a top priority, as they instead seem to be focusing on producing the best security panels possible. The most popular sensors for all versions of the Qolsys IQ Panel 2 Plus are the PowerG Sensors, which are sold under the DSC banner. And it's very telling that the upcoming Qolsys IQ Hub is expected to only support PowerG Sensors and forgo legacy frequencies entirely. But that doesn't mean that Qolsys 319.5 MHz Sensors don't have their merits, and we think that a Qolsys Dual-Tech Motion Sensor would be quite useful.

A dual-tech motion sensor uses both passive infrared (PIR) and microwave detection technology to sense movement. This is opposed to a standard motion sensor that just uses PIR. The advantage to a dual-tech motion is that both its PIR sensor and its microwave sensor must be triggered before the sensor will activate. This can be crucial for false alarm prevention. Dual-tech motions are also known to offer pet immunity, which is often a major selling point for those with dogs and cats. We have seen dual-tech motion sensors made for many different security systems, and users typically have a decent selection to choose from.

But you're a bit out of luck if you need a 319.5 MHz wireless dual-tech motion, as Qolsys never seemed to make one. That's a bit of a letdown, especially considering that the 319.5 MHz version is the most popular model of the IQ Panel 2 Plus. At least the DSC PG9984P remains an option for that system, as well as any other system that can support PowerG.

More Fall Detection Sensors

Nortek Control changed the game for medical alert sensors when they introduced the 2GIG F1-345 Personal Safety Pendant with fall detection technology. Qolsys soon followed suit with their own Qolsys IQ Fall Pendant. Both of these sensors have built-in accelerometers for detecting the rapid change in movement that occurs during a slip and fall accident. They also retained the capability of a traditional medical alert button, as a user can press and hold the button to alert the system during an emergency. We thought that emergency fall sensors would become the next big thing.

But oddly enough, the development of new fall detection sensors seems to have stalled. We have yet to Resideo try their hand at a fall sensor with an accelerometer. The same is true for a potential release for the PowerG lineup from DSC. We're not quite sure what the hold up is, as the offerings from 2GIG and Qolsys have proven to be quite successful. Some members of our team have also proposed the idea of having these sensors send a second alert to the system if a prolonged period of no movement occurs following a detected fall, as such a scenario may indicate that the individual has seriously hurt themselves. There has also been talk of using rechargeable batteries for these devices, in order for the sensor to work for a longer time period before a battery replacement is needed.

Right now, these sensors are just ideas. But the best idea of all is to sign-up for alarm monitoring! Alarm Grid offers monitoring plans for all needs and budgets. We recommend checking our monitoring page for more information. If you are interested in getting started, please email us at support@alarmgrid.com. We check our email from 9am to 8pm ET M-F. We look forward to hearing from you!

It's the first Alarm Grid video recap of September! We have some great new videos to show you, and we're hopeful that you find them helpful in setting up your system. Subscribe to our YouTube channel if you haven't yet, and stay tuned for future videos. Let's check out the newest videos.

Using a Qolsys IQ Panel 2 with a Phone Line

I explain how you cannot use the Qolsys IQ Panel 2 with a phone line connection. Phone line connectivity was once the most common communication path used with security systems. But with the rise of internet and cellular, that is no longer the case. Most newer panels like the IQ Panel 2 don't even have a jack for using a phone line. Instead, the system has built-in WIFI and cellular. Remember that activating for monitoring service with use of Alarm.com requires the activation of the system's cellular communicator.

Removing a Z Wave Device from a Qolsys IQ Panel 2

I show you how to remove, or clear, a Z-Wave device from the network by using a Qolsys IQ Panel 2 Plus. Clearing a Z-Wave device is typically done before enrolling it with the network to ensure that all the network data is properly wiped out. It is also done if the user no longer intends on using the Z-Wave device anymore. It is important to note that a device can still be cleared from the network even if it isn't actively enrolled with a Z-Wave hub.

Program SiXCT to Lyric Controller

I show you how to program a Honeywell SiXCT Door and Window Contact Sensor to a Honeywell Lyric Alarm System. The Honeywell SiXCT is a wireless door and window sensor that uses 128-bit AES encryption for enhanced wireless security. The sensor has a terminal block so that you can use it as a wireless transmitter with a wired contact sensor. The wireless range for the SiXCT is roughly 300 nominal feet, and it has a green LED light to assist with enrollment.

Program SiXMINICT to Lyric Controller

I show you how to program a Honeywell SiXMINICT to a Honeywell Lyric Alarm System. The SiXMINICT is a smaller version of the SiXCT. Unlike the SiXCT, the Honeywell SiXMINICT does not have a terminal block, and the sensor cannot be used as a wireless transmitter. It also has a smaller wireless signal range of only about 200 nominal feet. However, this door and window sensor is smaller than the SiXCT, and many users prefer the more compact design of the SiXMINICT. It retains the same green LED light to assist with enrollment.

Program a Honeywell SiXGB to the Lyric Security System

I show you how to program a Honeywell SiXGB Glass Break Sensor to a Honeywell Lyric Security System. As a member of the Honeywell SiX Series Lineup, the SiXGB utilizes 128-bit AES encryption, and it can only be used with the Lyric System. The wireless glass break sensor actively listens for the sound of breaking glass. It is great for monitoring windows and protective glass casings. The sensor has a detection range of roughly 25 feet, and it needs a direct line of sight to any glass being monitored.

Adding an External Communicator to a DSC PowerSeries NEO

I show you how to install an external communicator for a DSC PowerSeries NEO Security System. The PowerSeries NEO requires an added communicator for connecting with Alarm.com. The communicator connects with the DSC PCL-422 Module, which comes included. Then, a PC-Link cable connection is made between the NEO Panel and the PCL-422. Once the communicator is properly installed, you will need to activate it for monitoring service. Remember that you will need a monitoring plan that offers cellular communication.

With the holiday season quickly approaching us, we thought it was a good time to present some holiday buying guides for various security systems. Today, we are focusing on the Honeywell Lyric. This guide will help whether you are considering a new Lyric or adding upon an existing one.

The Honeywell Lyric is currently the flagship all-in-one wireless security system from Resideo. It has been one of the most highly regarded alarm systems for the past few years for several reasons. The system supports up to 128 wireless zones, making it suitable for applications big and small. It has a built-in Z-Wave controller, and you can pair up to 72 Z-Wave devices for home automation purposes. The Lyric is also one of the very few alarm panels that can support Apple HomeKit, making it perfect for iOS users looking to expand upon their HomeKit Network. In fact, we believe that the Lyric is the top HomeKit Security System on the market at this time.

The other major appeal of the Lyric is the fact that it can technically be monitored using an IP only communication path. This is because it connects with AlarmNet360 and the Total Connect 2.0 platform. Unlike most other monitoring platforms like Alarm.com which require cellular connectivity, Resideo allows IP only monitoring for panels connected with TC2. The Lyric has a built-in WIFI card, so you can connect with a local network right out of the box. Although we always recommend cellular communication for optimal reliability, we do understand that many users will want to use IP only service as a cost-cutting measure. Additionally, you can always add a cellular communicator to the Lyric System if you decide that you want to go cellular later on. Both the Honeywell LYRICLTE-A (AT&T LTE) and the Honeywell LYRICLTE-V (Verizon LTE) are great options.

Building a Lyric System from Scratch

For new users starting from scratch, the best option is typically to buy a complete Honeywell Lyric Security System Kit. This will include everything you need to get started with alarm monitoring. Whether you plan to use IP only monitoring service, or you intend on setting up cellular service, there is a perfect kit for you. For those planning to go IP only, no cellular communicator is needed, and you should choose a kit labeled "WIFI Only". If you intend to use the system for cellular monitoring, then both AT&T and Verizon system kits are available. Whether you go with a 3-1 kit (3 contacts and 1 motion) or a 10-1 kit (10 contacts and 1 motion) should depend on the size of the building you are monitoring. You will need more contacts to cover more doors and windows.

We recommend going through the Lyric System Kit Page linked above and finding the perfect Lyric Kit for your needs. In addition to the system, sensors, and optional communicator, you will also get a Honeywell LT-Cable with every kit. This makes it super easy to get the system up and running without having to prepare any standard alarm wiring.

Sensors for New and Existing Lyric Systems

One of the best aspects of the Lyric is that it has one of the most diverse and complete lineup of supported sensors in the entire security industry. Resideo created a sensor lineup designed exclusively for their Lyric System in the Honeywell SiX Series Sensors. These powerful sensors offer an impressive communication range of up to 300 feet indoors and 128-bit AES encryption for enhanced wireless protection. The lineup includes the following products:

• SiXCT Door/Window Contact
• SiXMINICT Mini Door/Window Contact
• SiXPIR Motion Sensor
• SiXGB Glass Break Detector
• SiXSMOKE Smoke Detector
• SiXCOMBO Combination Smoke/CO Detector
• SiXSIREN Wireless Siren
• SiXFOB Wireless Key Fob

With this great lineup, you can achieve a total and complete Lyric Security System by only using SiX Series devices. And for most Lyric users, that is the best option. But these are not the only sensors you can use with the Lyric System. The Lyric is also compatible with nearly any uni-directional 345 MHz sensor, which includes most devices from the Honeywell 5800 Series and the 2GIG 345 MHz lineup. Additionally, these lineups are both a little more fleshed out than the SiX lineup. There are certain sensor types (e.g. outdoor sensors) where you will need to turn to one of these product lineups.

Many users will also supplement their SiX Series devices with Honeywell 5800 Sensors and 2GIG 345 MHz Sensors as a cost-saving measure. These 345 MHz sensors will work just as well as the SiX Series devices on the Lyric. The only difference is that the 345 MHz sensors will not utilize any encryption, making them more susceptible to wireless attacks. The Lyric does have protection against 345 MHz RF jamming, but it can offer some users better peace of mind to know that their wireless sensors are encrypted. But if you are comfortable using non-encrypted wireless devices, then 345 MHz sensors can save you a lot of money when designing your Lyric System.

Some of our favorite Honeywell and 2GIG 345 MHz Sensors for use with the Lyric include:

• VERSA-2GIG Door/Window Contact
• 2GIG DW20R Recessed Door/Window Contact
• Honeywell 5816OD Outdoor Door/Window Contact
• Honeywell 5800PIR-OD Outdoor Motion Sensor
• Optex FTN-RRHW Outdoor Motion Sensor
• Honeywell 5822T Garage Tilt Sensor

Other Accessories for Your Lyric

We have already covered the sensors you will use with your Lyric System. However, there are still other devices you may want to add to your setup. The biggest attraction are Z-Wave devices like lights, door locks, and smart thermostats. One admitted weakness of the Lyric is that its automation controller is only a standard Z-Wave controller. The Lyric does not offer a Z-Wave Plus controller, and Lyric users cannot take advantage of the extended range and increased battery life of Z-Wave Plus. You can still use Z-Wave Plus devices with the Lyric System, but they will only offer the functionality of classic Z-Wave peripherals.

With that limitation in mind, you can still use the Lyric as a perfectly capable smart home automation hub. You can even pair the system as a secondary controller to other automation hubs (e.g. Samsung SmartThings) for added flexibility in your smart home. Nearly any Z-Wave automation device can be used with the system, so feel free to explore your options. We have plenty of devices on our website. Just remember that the Lyric System cannot support Z-Wave security devices. The Lyric Z-Wave controller is for automation purposes only. Alarm Grid does not sell Z-Wave security sensors on its website.

If you want to use your Lyric to control your garage door, then you will want to invest in a Honeywell 5877GDPK. This kit includes everything you need to get started with garage door operation for your Lyric System. Inside the kit there is a Honeywell 5877 Z-Wave Garage Door Relay, a Honeywell 5822T Garage Door Tilt Sensor, and a FortrezZ Z-Wave Siren/Strobe. You can purchase these items separately, but this convenient kit makes things easier.

The Lyric has only one compatible wireless keypad option, which is the Honeywell LKP500. This is a fairly standard push-button keypad with an LCD screen. You might also consider getting a cheap tablet and mounting it to the wall and using that as a keypad. You can download the Honeywell My Home Controller App to the tablet and essentially make the device a permanently mounted touchscreen keypad for your Lyric.

Lastly, you might want to get a desk mount for your Lyric System. This will eliminate the need for mounting the panel to the wall. Desk mounts are great for people living in apartments or rental homes, as well as users who simply do not want to drill holes. Using a desk mount sure beats laying the system flat on a counter! The Lyric Desk Mount is called the Honeywell LCP500-DK. There is also a desk mount for the Honeywell LKP500 Lyric Keypad called the Honeywell LKP500-DK.

Ask Us Questions!

Don't be afraid to reach out to us at Alarm Grid if you have any questions about the Lyric, or if you need any help choosing a system and accessories. The best way to reach us is to email support@alarmgrid.com. You may also reach us over the phone at (888) 818-7728. Remember that our support hours run from 9am to 8pm ET M-F. We look forward to hearing from you!

Hi DIYers! As you know, you can't have a security system without some sensors! Of course, with all the possible sensor types it can be overwhelming to decide which ones you really need for your system. While nearly every sensor type serves a purpose, these are the 5 we deem most crucial.

5. Glass Break Sensors

Glass break sensors are used to detect broken windows and other glass break events. These devices have built-in microphones, and they actively listen for the sound of breaking glass. Most glass break sensors utilize a dual-sound detection method. This means that the sensor must detect both the low-pitched thud of an object striking against the glass and the high-pitched shattering of the glass itself. This helps prevent false alarms. Glass break sensors are perfect for monitoring for forced entry into your home. You can even use a single glass break sensor to monitor multiple windows in the same room!

4. Environmental Sensors

Environmental sensors include devices like temperature sensors and flood sensors. These sensors monitor for unusual environmental conditions that likely indicate a problem. For example, a flood sensor will let your system know if there is a water leak that could lead to expensive water damage. Meanwhile, a temperature sensor will monitor for unusually high or low temperatures that indicate a broken HVAC system. There are also many environmental sensors that can perform dual functions and operate as both temperature and flood sensors.

3. Life-Safety Sensors

Life-safety sensors are used to monitor for life-threatening environmental conditions, such as a fire or an outbreak of carbon monoxide gas. These include devices like smoke and heat detectors and carbon monoxide sensors. There are also special combination CO and smoke detectors that can monitor for multiple types of life-safety conditions. Enrolling properly functioning life-safety sensors with your system can mean the difference between life and death. And for fires, you will be able to ensure a faster response if one occurs while you are away. These are a must-have for any system.

2. Motion Detection Sensors

Motion sensors are some of the most useful sensors you can add to your system. These devices alert the system upon detecting a change in infrared (IR) energy caused by movement. There are also some motion sensors that use microwave radar technology in addition to passive infrared (PIR). You can install motions inside your home as interior sensors to determine if anyone gains entry while you are away. They are perfect for detecting general activity and movement in areas where none should be present. There are even pet-immune motion sensors so that you won't need to worry about your pets setting them off. Just make sure you choose the installation area carefully.

1. Door & Window Contacts

Door and window contacts are the easiest to use and most effective sensors for any alarm system. They are used for letting your system know if someone opens up a door or window. These sensors usually consist of two parts, which are a sensor and a magnet. The sensor goes on the door or window frame, and the magnet goes on the moving part of the door or window. Opening the door or window will cause the magnet to become separated from the sensor. The sensor will detect this and alert the system. There are also recessed door and window sensors that allow for a more aesthetically- pleasing installation!

Remember, our goal at Alarm Grid is to set you up with the perfect security system for your needs. We also offer top-quality alarm monitoring services that are great for pairing with a new or existing alarm system. If you ever need help designing or using your security system, or if you want to learn more about our monitoring services, please reach out to us! We are best reached by email at support@alarmgrid.com. Or you may call us at (888) 818-7728 during our regular business hours of 9am to 8pm ET M-F. We look forward to hearing from you!

Honeywell is known for producing some outstanding security equipment, and their wireless door and window contacts are no exception. With wireless contacts available from both the 5800 Series lineup and the SiX Series lineup, there are certainly some great options. But with all the possibilities, it might seem overwhelming if you are just getting started. This guide will help you choose the perfect wireless Honeywell door and window contact for your needs.

First, a user should understand exactly how a door and window contact works. Almost every wireless Honeywell door and window contact functions using the exact same principles. These devices consist of a sensor and magnet. The sensor is the "brains" of the operation, and it is responsible for sending signals to the alarm system. It is typically installed on or inside the door or window frame. The magnet is installed on or inside the door or window itself. The only wireless Honeywell contact that does not use a magnet is the Honeywell 5800RPS. This is a wireless recessed sensor for doors only that operates using a plunger switch.

For proper operation, the device's magnet should be installed very close to the sensor. We usually recommend placing it within a half-inch of the sensor. However, some 5800 Series contacts, like the 5816OD, can function properly with a slightly larger spacing gap. When the door or window is opened, the magnet will separate from the sensor. This will cause a reed switch inside the sensor to activate. When this happens, the sensor will send a signal to the alarm system so that the programmed Response Type can be performed.

It's also important to know the system compatibilities for the different Honeywell wireless contacts. Their wireless contacts come from two different sensor lineups. These are the 5800 Series and the SiX Series. The 5800 Series contacts are unidirectional devices that operate at 345 MHz. This makes them compatible with any Honeywell System or 2GIG System. But the SiX Series contacts are bi-directional, fully encrypted sensors that communicate using 2.4 GHz WIFI. These sensors only work with Honeywell Lyric Systems.

If you have a Honeywell Lyric Controller, then you can choose between any Honeywell wireless contact on the market. But if you have a LYNX Touch or a VISTA System with an added wireless receiver, then you are restricted to the 5800 Series contacts. Additionally, if you are using a 2GIG GC3 or a 2GIG GC2, then you can use either 2GIG Contacts or Honeywell 5800 Series contacts. Any alarm systems that do not accept the 345 MHz frequency are unable to use Honeywell contacts.

The only two contacts in the Honeywell SiX Series Lineup are the Honeywell SiXCT and the Honeywell SiXMINICT. These are both wireless, surface-mount sensors that work exclusively with Honeywell Lyric Systems. What makes these sensors special is that they feature 128-bit AES encryption. Whenever the sensor sends a command to the Lyric System, the system must then send a secure response back to the sensor. The command will only go through if this secure response is received. Many security experts refer to this as a "digital handshake", and it is excellent for preventing any hacking attempts or wireless attacks.

The SiXCT and the SiXMINICT do have a few slight differences. Most notably, the SiXMINICT is smaller and more compact than the SiXCT. The SiXCT measures at 3.13”L x 1.61”W x 1"D, while the SiXMINICT measures at 2.44”L x 1.25”W x .45”D. So users who want a smaller sensors should go with the SiXMINICT. But the benefit of the SiXCT is that it features a larger wireless range (~300 feet) than the SiXMINICT (~200 feet). However, only users with particularly large properties should have to worry about signal range. One thing that these sensors do share in common is that they can both be batch-enrolled with the Lyric Controller.

• Honeywell SiXCT - The standard SiX Series contact. Features a 300 foot range and encryption. Will only work with Lyric Systems.
• Honeywell SiXMINICT - The more compact SiX Series contact. Provides a 200 foot range and encryption. For Lyric Systems only.

But the SiX Series contacts aren't for everyone. For one, they will only work with the Lyric Systems. There are also no recessed contacts in the SiX Series lineup. Users who don't have a Lyric Controller or want a recessed sensor should look to the Honeywell 5800 Series instead. This is an incredibly diverse sensor lineup that has an appropriate contact option for virtually any situation. Any Honeywell or 2GIG System will work with these sensors. This includes any Lyric Controller, L7000, L5210, VISTA P-Series, 2GIG GC3, 2GIG GC2 and more. Most 5800 Series contacts feature a 150-200 foot wireless range that can be effectively doubled with the use of a 5800RP Wireless Repeater.

When selecting a 5800 Series Sensor, a user will choose between a surface-mount contact and a recessed contact. With a surface-mount contact, the sensor and the magnet are mounted on the outer surface of the door or window and its frame. But with a recessed contact, the sensor and magnet are installed inside the door or window and its frame. Surface-mount sensors are very easy to install, since they only require screws or double-sided foam tape. But the sensor will be visible on the outside of the door. Recessed sensors are more difficult to install since holes will need to be drilled. However, some users will appreciate the fact that recessed sensors are hidden.

For users who go with a surface-mount sensor there are certainly some great options in the 5800 Series. One of our favorites is the 5800MINI. This is a reliable sensor that boasts an impressive 200 foot range, despite its small size of just 2.2"H x 1"W x 0.25"D. This is arguably the best surface-mount contact in the Honeywell 5800 Series.

• Honeywell 5800MINI - A small and discreet surface-mount contact. Offers a 200 foot wireless range. Great for almost any application.

But there are other surface-mount options than just the 5800MIIN. The 5816 is the most popular sensor that Honeywell has ever offered. It features a larger size and roughly the same range as the 5800MINI. But unlike the 5800MINI, the 5816 can be used as a wireless transmitter for a normally closed hardwired device. Honeywell also offers the 5820L Slim Line for narrow installations and the 5816OD for outdoor use.

• Honeywell 5816 - Honeywell's most popular sensor. Can also be used as a wireless transmitter for a single NC hardwired device.
• Honeywell 5820L - A slim line door and window contact that is great for narrow applications. Features a 150-foot range.
• Honeywell 5816OD - A surface-mount contact for outdoor installations. Excellent for monitoring fences, sheds and detached garages.

Honeywell also offers some less popular 5800 Series contacts. These include the 5811 (discontinued), the 5814, the 5815 and the 5816MN (discontinued). While these sensors will work just fine, there isn't really any reason to choose them over another 5800 Series contact.

• Honeywell 5811 - A small and discreet sensor that has since been discontinued. Replaced by the Honeywell 5800MINI.
• Honeywell 5814 - Another compact sensor option. It is not as robust as the 5800MINI. Its wireless range is only about 100 feet.
• Honeywell 5815 - An aesthetically pleasing surface-mount contact that has roughly the same functionality as the 5816.
• Honeywell 5816MN - A discreet surface mount sensor that has been discontinued. Replaced by the Honeywell 5816MN.

There are also several great recessed contacts in the 5800 Series. The Honeywell 5818MNL is a relatively standard recessed contact that can be used with almost any door or window. It features a 200-foot range, and the installation only requires minor drilling. The Honeywell 5800Micra is a recessed contact for windows only. It is a very small sensor with an attached antenna for sending wireless signals. Finally there's the 5800RPS, which uses a plunger switch instead of a sensor and magnet. This sensor can only be used with doors. When the door is closed, the plunger switch will be pressed in. Once the door is opened, the plunger switch will come out and activate the sensor.

• Honeywell 5818MNL - A standard recessed contact for doors and windows. It is easy to install, and it has a 200 foot range.
• Honeywell 5800Micra - A small recessed contact for windows only. Its antenna must be adjusted carefully when installing.
• Honeywell 5800RPS - A recessed sensor that uses a plunger switch instead of a magnet. For use with doors only.

Alarm Grid has previously discussed the batteries used with door sensors. We recommend checking out that blog post for more information on which batteries to use with a door and window sensor. If you ever need any additional help choosing a Honeywell door and window contact for your DIY wireless alarm system, please feel free to send an email to support@alarmgrid.com. You can also contact one of our technical specialists by calling 888-818-7728 from 9am to 8pm EST M-F.

Door alarm sensors, or contacts, are some of the most important devices used with security systems. These devices alert a user whenever their door is opened. They can be used on virtually any type of door. These might include a front door, a back door, screen doors, a patio door, a shed, cabinets and any door inside the building. We typically find that door alarm sensors are some of the easiest to use devices with an alarm system. But still, it can be helpful to read through a comprehensive guide explaining the full ins and outs of these devices. So it here is - everything you've ever to know about door alarm sensors.

The Basics of Door Alarm Sensors

Most traditional door sensors feature a relatively simple design and premise. These devices usually consist of a sensor and a magnet. The sensor is placed on or inside the door frame, and the magnet is placed on or inside the door itself, within a half inch of the sensor. Opening the door will cause the magnet to pull away and separate from the sensor. When this happens, a reed switch inside the sensor will activate. This will cause the sensor to send a signal to the security system, letting it know that the door was opened. The system will then perform the appropriate response based on how the sensor's Response Type was programmed. At the surface, it's all very simple. Some examples of these traditional sensors include the Honeywell 5800MINI, the Honeywell SiXMINICT and the VERSA-2GIG Sensor. Traditional door sensors can be either surface-mounted or recessed.

There's also a second variation of door sensors, known as mechanical door sensors. This type of sensor features a physical switch that is pressed down when the door is closed. When the door is opened, the switch will pop up, causing the sensor to activate. From there, the system will perform the Response Type assigned to the zone for that sensor. This type of door alarm sensor is far less common than the other type of sensor. However, the end result is still the same - the system will still perform the programmed Response Type when the sensor is activated. An example of this type of sensor is the Honeywell 5800RPS. While you are less likely to come across this type of door sensor, it's still worth mentioning just in case. Mechanical door sensors are only available in the recessed variety.

Types of Door Sensors - The Two Distinctions

Now that you know the very basics of door sensors, you can start thinking about the different types. While almost every door sensors operates using one of the two mechanisms mentioned above, there are two other distinctions that are commonly made between door sensors. These are whether the door sensor is wireless or wired and whether the door sensor is surface-mounted or recessed. These considerations will play a big role in determining which door sensor you choose to purchase for your alarm system.

A wireless door sensor will communicate with an alarm system wirelessly. This will prevent the need for running a wire from the system to the door sensor. This can make wireless door sensors significantly easier to install. Another great aspect of wireless door sensors is that they can usually be auto-enrolled with the security system. That said, a wireless sensor will need to have its battery replaced every three to five years. On the other hand, a wired door sensor will need to be physically connected with the alarm system. This can make the installation considerably more difficult in certain cases. However, a wired sensor will never require any battery replacements.

If you are using a wireless door sensor with a wired alarm system, such as a Honeywell VISTA Panel, then you will need to use a wireless receiver. This will allow the wireless signal to be received by the system. When choosing a wireless door sensor, make sure that the wireless frequencies it uses are compatible with your alarm system. For example, Honeywell Panels look for wireless signals that operate at a frequency of 345 MHz, while Qolsys Panels use signals that operate at a frequency of 319.5 MHz. If you try to use a wireless door sensor that does not communicate at the correct wireless frequency, then it will not function with the alarm system.

The other major distinction between door sensors is surface-mount sensors versus recessed sensors. Simply put, surface-mount sensors are installed on the outside of the door and its frame, while recessed sensors are installed in the inside. Surface-mount sensors require no drilling. In the easiest scenario, it is possible to mount them using a double-sided adhesive (foam tape). They can also be mounted using screws. With their easier installation, this is generally the preferred type of door sensor. Most users do not mind the fact that a small sensor will be visible on the outside of the door.

However, for users who do want a more discrete installation, there are recessed door sensors. These sensors and their magnets need to be inserted into holes that are drilled into both the door and the frame. The exact size of the holes will depend on the specific model of the recessed door sensor that is being installed. Once the sensor and magnet have been installed, they will not be visible from the outside. That said, most users opt for surface-mount door sensors due to the easier installation.

Some Notes on Response Types

The primary function of any security sensor is determined by its Response Type. This refers to what action the system will take when the zone is faulted (e.g. the door is opened). Below are the Response Types that are most commonly used with door sensors:

• Entry / Exit: If the door is opened while the system is armed stay or armed away, then the system will need to be disarmed within its entry delay period. If the system is not disarmed within this time period, then an alarm event will occur. Most alarms will feature two different Entry / Exit settings. This allows two different entry delay periods to be used on the same system for different zones.
• Perimeter: If the door is opened while the system is armed stay or armed away, then an alarm event will occur immediately.
• Interior Follower: If the system is set to armed away, an alarm event will immediately occur if the door is opened, assuming that an entry / exit zone is not faulted first. If an entry / exit zone is faulted first, then the system must be disarmed within its entry delay period, otherwise an alarm event will occur.
• Interior With Delay: If the system is set to armed away and the door is opened, then the system must be disarmed within its entry delay period. If the system is not disarmed within this time period, then an alarm event will occur.
• Day / Night: If the system is disarmed and the door is opened, a trouble event will occur on the system. If the system is armed away or armed stay and the door is opened, an alarm event will immediately occur on the system.
• 24 Hour Audible: Opening the door will immediately cause a full system siren and an alarm to be set off, regardless of what state the system is currently in. This Response Type should not be used unless the door should never be opened for any reason.
• 24 Hour Auxiliary: Same as 24 Hour Audible, but only the panel itself will produce a siren. Any external sirens or noisemakers will not activate. This zone type is ideal for emergency medical cabinets that would only be opened in a serious medical emergency.
• 24 Hour Silent: Same as 24 Hour Audible, but no siren or sound will be produced.
• Fire No Verification: Opening the door will immediately cause a fire alarm to be set off, regardless of what state the system is currently in. This is the ideal Response Type for fire doors.

Certain Response Types are only available for certain Device Types. Depending upon the panel you are using, not all of these Response Types will be made available for the Device Type of "Door". A way to work around this is to set the Device Type to "Other". This will allow you to set any possible Response Type for the door sensor.

Other Programming Settings

Programming a door sensor has to do with more than just the Response Type and the Device Type. Below are some of the other programming settings available for a door sensor. Please note that these settings are specific for a Honeywell Lyric Controller, and different settings may be available on another type of panel.

• Serial Number: This is how the system will specifically identify the exact door sensor that is being used.
• Loop Number: This tells the door sensor what function it should perform. Each door sensor usually has a specific loop number that should be set for the device to function as a door sensor. Some door sensors have multiple possible functions that can be used with the device. One example is the Honeywell 5816, which can be used as both a door sensor and as a wireless transmitter depending upon the loop number that is set.
• Zone Descriptors: These serve as the name of the door sensor. The panel will announce the zone descriptors whenever the zone for that sensor is affected.
• Alarm Report: This tells the system whether or not it should send an outbound signal to the central monitoring station. If you turn this off, then all the sounds and sirens will still be made, but a distress signal will never be sent to the central station. An example for turning this off might be if you are monitoring a liquor cabinet to make sure your teenage doesn't get into it. You might want a very loud siren to go off so that you know if this happens. However, you obviously wouldn't want the police to show up at your house in this situation!
• Chime: This will have the panel produce a simple chime whenever the door is opened. Many panels will allow you to toggle between different chime options for the panel. Remember, you will still need to have the local chime for the system enabled from the main settings menu.
• Supervision: This will have the system monitor the door sensor for low battery or loss of signal. Keep this enabled to make sure that the door sensor is always in proper working order. This setting is only used with wireless door sensors.

For any programming questions related to a specific panel, please consult the programming guide for that panel. This information is readily available on the Alarm Grid website in the form of FAQs.

Common Door Sensor Questions

Below are some questions that are commonly asked about door sensors:

1. How do I program my door sensor?

If it is a wireless door sensor, it can most likely be auto-enrolled.This is accomplished by accessing zone programming on the system and then faulting and restoring the door sensor three times to learn it in. You can fault and restore the door sensor by separating the sensor and the magnet and then clicking them back together. From there, make any necessary programming configurations on the panel. See the above information on Response Types and other programming settings.

If it is a wired door sensor with a hardwired VISTA Panel, then we recommend consulting this FAQ. You may also need to consult the VISTA 15P and 20P Programming Guide.

2. How long do door sensor batteries last?

A wireless door sensor will typically require a battery replacement every three to five years. Wired door sensors do not use batteries, and they will never require a battery replacement.

3. How close should the door sensor be to its magnet?

We usually recommend placing the door sensor magnet within a half inch of the sensor. Some sensors may allow for a greater separation distance than others before a faulted zone will occur. The closer the magnet is to the sensor, the less likely an unwanted fault or a false alarm is to occur.

4. Are there any encrypted wireless door sensors?

Yes, there are encrypted wireless door sensors. The Honeywell SiXCT, the Honeywell SiXMINICT, the Qolsys IQ DW MINI-S and the Qolsys IQ Recessed Door-S are all encrypted wireless door sensors.

5. What is the best door sensor?

Please see the following FAQs:

• What Are the Best Wireless Door/Window Alarm Contacts?
• What is the Best Wired Door/Window Alarm Contact?

When Honeywell first invited us to be a part of the beta program for their new Lyric Controller security system in 2015, one of the first things we noticed was that the wireless door/window sensors that came with the system were much bigger than the existing wireless door/window sensors that work with all of the other Honeywell wireless security systems. At the time, Honeywell said they were working on a smaller version door/window sensor and we are excited to finally announce that those smaller sensors are now available!

One of the major advantages of the Lyric security system over other wireless security systems is that the Lyric supports a new line of bi-directional, encrypted sensors that are more secure than the existing 5800 Series sensors. The SiX Series sensors utilize 128-bit AES encryption and communicate on a 2.4GHz Wi-Fi radio frequency channel directly to the Lyric system. This advanced technology makes it much more difficult for a savvy intruder to be able to "spoof" or hack the wireless SiX Sensors in an attempt to gain access to the protected property without setting off an alarm. While the sensors use a similar frequency that WIFI routers will use, the sensors communicate right to the Lyric's built-in wireless receiver and don't use the WIFI network in the home for sensor communications. Honeywell developed the SiX Series technology themselves and even put in specialized protocols designed to scan nearby networks to prevent possible WIFI interference. Before the Lyric system and SiX Series sensors were released, there weren't really any good options for wireless security systems that utilized encrypted sensors but encrypted sensor technology is a growing trend in the industry and we encourage everyone that has a non-encrypted system to consider upgrading to add an extra layer of security to your home.

The original SiX Series door/window sensors that were available when the Lyric system first launched were the SiXCT sensors. The SiXCTs are 3.13 inches long, 1.61 inches wide and 1 inch deep (depth of the sensor out into the room compared to the mounted surface) which is fairly large when you consider that you may want to have one installed on all of your home's doors and windows.

The new SiXMINICT door/window sensor is only 2.44 inches long, 1.25 inches wide and 0.45 inches deep off the mounted surface making for a much less intrusive sensor and much more aesthetically pleasing installation of your Lyric system with encrypted sensors protecting your doors and windows. The magnet for the SiXMINICT is also smaller than the magnet for the SiXCT. The SiXMINICT magnet is 1.5 inches long, 0.44 inches wide and 0.44 inches deep off the mounted surface while the SiXCT magnet is 1.5 inches long, 0.44 inches wide and 0.69 inches deep. The SiXMINICT and magnet provide a much flatter design so that the sensor and magnet blend into your door and windows and frames much better than the original SiXCT and magnet.

While the SiXMINICTs are much nicer looking, please keep in mind that the don't offer the same ability as the SiXCTs to wire in a wired sensor to the SiXCT so that it can act as a pass through wireless transmitter to send the alarm from the wired sensor to the wireless Lyric security system. In re-designing the smaller sensor, there wasn't enough room to add in the internal screw contacts that the SiXCT has for the option to wire in a wired device so the SiXMINICT can only be used as a regular sensor with the included magnet.

We have updated all of our Lyric wireless security system kits so that they include the newer, smaller SIXMINICTs instead of the older, bigger SiXCTs and we even put together a value 5-pack of SiXMINICT sensors that can save you on your system purchase if you need more sensors than are included in the kit you're ordering or if you need to add encrypted protection to 5 or more new doors/windows.

We believe encrypted sensor technology is only going to become more and more popular and we are excited to see that Honeywell is going to build out their line of SiX Series sensors so that hopefully there will eventually be an encrypted version of every 5800 Series device they offer now. Make sure to keep an eye on our blog as we will continue to let you all knwo about any new SiX devices that are released by Honeywell.

We strive to have some of the best pricing on the internet for security products. When prices are reduced for us, we do our best to quickly pass off those savings to anyone who has made a purchase here.

In the last week, we have reduced the prices on over 100 items an average of 6%. Our Lyric kits have all seen price reductions between 6% and 19%.

Below is the list of all items whose price has been reduced. We hope you enjoy the savings!

If you are looking for the most advanced security system on the market, Alarm Grid has finally begun selling the Lyric Controller. This much-anticipated panel has been on the market for only a few hours now, and Alarm Grid is the first home security company to be selling it online!

In addition to the Lyric Controller, Honeywell has released a number of their encrypted peripherals, such as the SiXCT, the SiXPIR, the SiXFOB, the SiXSIREN and both the Verizon and the AT&T cellular communicators.

As has been the case with all our security systems, we are selling Lyric kits at a slight discount for those that need specific pieces to come with their Lyric's. There are a number of pieces that are not yet quite available. The Lyric LKP500 keypad, the SiXGB, and the SiXSMOKE, are still not in inventory, though we do anticipate getting them in soon. If you are ordering a Lyric, you can certainly add these items to your cart, but we want you to know that we're not shipping them until Honeywell gets some to us.

Also worth noting, we have a very limited quantity of the Lyrics and we've been told that we won't be re-supplied for a couple of weeks. We're selling them on a first-come-first-serve basis. So get your system today before they're all gone.

For those who are a little bit intimidated by the idea of installing the system, luckily for you, we have a series of great Lyric security system Installation videos you can watch! While you're there, make sure to hit subscribe. :)