Press Releases Posts

Resideo has identified an issue with some Total Connect 2.0 passwords. Apple iOS users on firmware version 17.6.1 may be unable to log into the Total Connect 2.0 app due to certain special characters. Passwords containing a plus sign (+) or exclamation point (!) will cause a login failure.

This issue can also affect account usernames. However, since we typically use the customer's email address as the username, it's rare for these special characters to be present. After we reported a customer who suddenly couldn't log into their account, Resideo informed us of this issue. Interestingly, we tested a login using an exclamation point (!) in the password on iOS version 17.6.1, and it worked for us, so the information remains somewhat unclear.

If your password worked before but no longer does after updating your iOS device, or if you're a new TC2 user on iOS and can't log in after creating an acceptable password, the only option is to change your password.

1. Go to the Total Connect 2.0 login page.
2. Accept Cookies if prompted. Until you do, you won't be able to successfully perform Step 3 and Step 4 below.
3. Click "Problems Signing In?"
4. Click on either "Forgot Username" or "Forgot Password".
5. Follow the prompts to reset either your username or your password. If you need to reset both, you'll have to first reset one, and then follow these same steps to reset the other credential.
6. Once you've created both a Username and a Password without a plus symbol (+) you should be able to log in.

As you can see from the password reset screen, both a plus symbol (+) and the exclamation point (!), which we have verified will work, should be acceptable special characters:

HTML browser logins are not affected, nor does the issue affect Android devices. This is strictly an issue with Apple iOS devices, and as far as we know, only with firmware version 17.6.1. An iOS user who does not want to change their username or password can elect to use a browser to access their Total Connect 2.0 account instead.

This issue will likely be resolved, but whether the fix will come from Resideo through a TC2 update or from Apple via an iOS update is uncertain. If we receive any updates, we'll post them at the top of this page, so stay tuned!

Update 08/30/24: Resideo posted its final update on this issue today. To summarize, they found an issue with the battery charging scheme in the doorbell's firmware. A firmware update is being applied to future stock and will automatically be rolled out to devices in the field. You can read the full notice here.

Update 08/13/24: Resideo posted an update today regarding this issue. According to the update:

"We have determined that, if the doorbell isn’t installed within 1 year of production, the embedded battery, which is responsible for powering the doorbell while the external chime is activated, will not support a smooth installation."

This is a particularly thorny issue given that the battery in the VX1 Video Doorbell is non-serviceable. After the three (3) to five (5) years of expected battery life, when the battery begins to fail, the entire VX1 must be replaced.

You can read the full updated notice here.

Original Post 08/08/24:Yesterday, Resideo released a Technical Notice about its First Alert VX1 HD Video Doorbell. A small number of units display a red LED for an extended time after installation. If you have a unit displaying this behavior, you can return it to where you purchased it or contact your alarm dealer.

First of all, if you have a First Alert VX1 HD installed and it is working as expected there is nothing you need to do. This issue has been reported in a small number of units and only very recently. If your VX1 HD was affected, you would know almost immediately after installation.

Next, it's important to clarify which LED we're talking about here. The VX1 HD has a Status LED which is located above the doorbell button and microphone. In addition to the Status LED, the doorbell button itself has an LED surrounding it. This notice refers to the small Status LED. According to the Installation Instructions, a solid red Status LED indicates that the battery is not charging.

It's not uncommon, after installation, for the Status LED to show either red or amber. An amber Status LED indicates that the battery is below the normal operating threshold but is charging. However, if, after 90 minutes of charging, the Status LED remains red, and assuming the input power and wiring are confirmed to be good, there is a problem.

Because of this issue, Resideo has chosen to put the First Alert VX1 HD on sales hold. This means that if you attempt to order a new unit from the distributor, it won't be available. Alarm dealers may have stock on their shelves that they can continue to sell, but they run the risk of encountering this issue.

Alarm Grid doesn't keep stock, ensuring that when you order from us, the product you get is the most recently manufactured version possible. Though distributors do keep stock, so there is always a chance that a seldom-ordered product may have been on their shelf for some time.

We will not discontinue the First Alert VX1 HD, as we assume this hold will be brief. You can still order the doorbell on our site. Currently, if you do you'll receive an email that the product is on backorder and that it will be shipped as soon as stock becomes available again.

That's all we know at this point. There is not enough information to determine if this is a problem with the battery, the charging circuit, or if this is just a status indication malfunction. It's unlikely that Resideo manufactures the battery. Is it an issue with the battery vendor? Is it something anomalous that occurred during manufacturing? That's why the product has been put on hold so they can perform testing and diagnostics.

In some cases, the manufacturer may need customers to send them problem units. It's difficult to confirm and fix an issue if you can't reproduce it. If that's the case here, it's possible Resideo may ask your alarm dealer to send returned VX1s directly to them for testing. As an end-user, this won't really affect you. It's just nice to know what goes on behind the scenes sometimes.

Depending on what they find, Resideo may require that any existing distributor stock be returned to manufacturing to be reworked or retrofitted. This is usually accompanied by some type of marking on the box, like a green dot. This will usually be located near the box date code. In this way, everyone will be able to tell that a newly purchased First Alert VX1 HD Video Doorbell does not suffer from this issue.

It was only supposed to be a simple software update! These words are I'm guessing, being echoed by the cybersecurity giant, CrowdStrike. Over night CrowdStrike pushed out a misconfigured/corrupted update to its customers. This has caused major issues to banks, airports, TV stations, health care organizations, hotels, and you guessed it, the alarm industry.

Early this morning, Alarm Grid became aware of multiple issues concerning alarm systems. Resideo reported issues July 19 at 3:57am EST. They reported All Pro Series and LTEM-P devices failing on all services. Also, TC2 Application notifications and event processing were delayed. They have reported that most systems are already back online.

Alarm.com reported issues July 19 at 1am EST. The reported issues were affecting access to the Partner Portal, Mobile Tech, the customer website, and the customer app, and may cause delayed execution of commands and signals sent to and from customer systems.

CrowdStrike has reported that the fix has been implemented, but that it could take time to get things back up and running. Both AlarmNet and Alarm.com services are reporting improvements.

Please continue to check back here for updates.

UPDATE: As of 10am EST, Alarm.com has reported that all of their services are fully restored.

UPDATE: 3:30p EST. Resideo has reported that most of the systems are back online. And that alarm delivery services are not impacted. Although we saw their service return much earlier than this update.

Thanks for your patience. If you continue to have issues with Alarm.com or Resideo's services, you can email us here.

Rogers has set a date of March 31, 2025 for its 2G/3G network sunset. If you are a Canadian customer with a Rogers 2G/3G communicator, your system will cease to communicate via cellular upon shutdown. At best, you will see a trouble condition. At worst, communication will be cease completely.

Rogers is a large cellular provider in Canada. When AT&T and Verizon announced their respective 2G/3G network sunsets a few years back, Rogers made the decision to keep the portion of their network that is used by alarm communicators active. In the intervening years, it has been working to beef up its infrastructure. The time has now come to sunset the remainder of the older network.

If you have an alarm system with a Rogers cellular communicator you should begin planning an upgrade. This may require that you upgrade your whole system, or just your cellular communicator. Whichever the case, now is the time to begin planning. If your system uses cellular as its only means of communication, and you have one of these Rogers 2G/3G communicators, your system will be left unable to communicate once the shutdown takes place. In addition, you will see a trouble condition displayed on your system that you will be unable to clear.

If you have a dual-path system with a Rogers 2G/3G cellular communicator, then your system will still be able to communicate after the shutdown, but you will have a trouble condition on the system that won't clear until you either disable cellular communication, or correct the problem. In this case, correcting the problem means replacing the cellular communicator. Depending on your alarm panel, this may or may not be possible without replacing the entire panel.

Alarm.com customers who are affected by this sunset will soon begin seeing prompts telling them to upgrade. Starting in October, Alarm.com customers who still have a 2G/3G Rogers cellular communicator will see a trouble message when they log into the customer app or website. The message will instruct them to upgrade their communicator soon in order to avoid a service interruption.

This news may seem dire, but don't worry, Alarm Grid is here to help you through the transition. In future posts, we'll be providing additional information, including special promotional pricing to help you upgrade in the least painful way possible. We'll also be here with plenty of information on how best to upgrade. In the meantime, if you have questions you can send us an email to support@alarmgrid.com.

This year with the holiday falling on Thursday, Alarm Grid will be closed on both Thursday July 4th and Friday July 5th. This break allows our team members to rest and spend time with their families. We'll be back refreshed on Monday, July 8th ready to help you protect your home or business!

For existing Alarm Grid customers, this means that technical support and account activation will be unavailable during the holiday. However, our central station partners are available around the clock to process any alarm signals. If you need to cancel an alarm or put your system on test, you will do those things as you normally would.

If you reside in the US and need to contact the central monitoring station to cancel an accidental alarm, verify a signal, or put your system on test you can contact Criticom Monitoring Services (CMS) by dialing (888) 818-7728 and choosing Option [9].

Canadian customers with the same central station needs can contact Rapid Response at (800) 932-3822. Remember, any time you call either monitoring station, you will be asked for your name, address, and your false alarm password. Providing incorrect information when asked will result in the dispatch of authorities.

If you need to make changes to your account or you have technical support questions monitoring station operators can't help you with those inquiries. Instead, email us at support@alarmgrid.com. Provide as many details as possible about the request or issue. Remember, if you're requesting account changes we'll need your false alarm password or the last four (4) digits of the credit card number we have on file for billing before we can make those changes. Providing this in your initial request will make the process go more quickly.

With hot, dry conditions in some areas, be cautious when using fireworks. Ensure you have proper extinguishing methods available in the event of a fire. Most large scale fireworks displays take place over a large body of water so that accidental fires are avoided.

Also remember that fireworks are likely to scare both pets and wild animals. Many young animals get separated from their mothers at this time of year. If you encounter a seemingly abandoned wild animal baby, contact your local wildlife rescue and follow their recommendations. The Humane Society has a listing of wildlife rehabbers by state.

We hope everyone enjoys a chance to relax this holiday weekend. However, we recognize many will be working. A big thank you to central station operators, wait staff, hospital staff, police, fire, EMS personnel, and anyone else working this holiday. We appreciate your dedication!

Alarm.com now offers a new burglary deterrence feature available from some of its cameras. Alarm Triggered Warning Sounds, once configured, will cause selected cameras to emit a siren when an alarm is triggered. This feature can be activated based on sensors, partitions, or the entire panel.

One crucial note about this feature is that it is only compatible with non-doorbell Alarm.com cameras that support the two-way audio feature. A full list of compatible cameras, with links, is available in our FAQ that walks you through setting up this new deterrence feature.

The requirements for this feature are fairly simple:

• A security service package with Panel/InApp panics enabled by your alarm dealer.
• A video service package with the Audio for Non-doorbell Cameras add-on enabled by your alarm dealer.
• At least one camera compatible with the MTWS feature.
• An IQ4 Panel (IQ Panel 4, IQ4 Hub, or IQ4 NS). You can't do this with a video-only account.

See? Easy peasy! If you have an Alarm.com camera that supports two-way audio, and it's not a doorbell camera, then it likely supports this feature. On general principle, be sure your camera is updated to the latest firmware. For most cameras, the minimum firmware to support this feature is Firmware Version 0.6.7.852+. The exception is the ADC-V515, which requires Firmware Version 0.0.5.476+.

This feature is easy to set up. Just use the Smart Rules Builder through either the customer website or the Alarm.com app available from Google or Apple. Once you log into your account it takes about two minutes to create the rule needed to utilize this feature.

The Alarm Triggered Warning Sounds (ATWS) feature works hand-in-hand with the Manually Triggered Warning Sounds (MTWS) feature. If you have any MTWS capable cameras, then you know you will be able to configure the ATWS feature and vice versa. Manually Triggered Warning Sounds are not automated. Instead, a user must manually trigger the sound while logged into either the app or the website. You can check out how to use MTWS here.

When you manually trigger a warning sound from one or more cameras, the sound duration is 30 seconds, unless you manually turn the warning sound off sooner. When the warning sound is alarm triggered, the duration is five (5) minutes, or until the alarm is canceled by a user disarming the system where the alarm occurred.

Scenario 1: Manual Trigger

You're away from your home or business. You receive an alert that motion has been detected by one of your cameras. You log into the app and, pulling up the live view for your camera see a person or animal in an area of your property where they don't belong. While you're viewing the live video, and assuming this is a compatible camera, you can choose to trigger a warning sound that will hopefully scare the person or animal away. In this scenario the Manually Triggered Warning Sound can be used to great effect.

Scenario 2: Alarm Trigger

You're at home, and your system is armed in the Home mode. While you're asleep an intruder attempts to enter your home by breaking a first floor window. They may have triggered an alert from one of your outdoor cameras, but you slept through it. The window they're attempting to enter through has a glass break detector associated with it and this detector is active when the system is armed in Home mode. The intruder breaks the window, but the alarm goes off. This causes not only the alarm panel, but also your outdoor cameras to begin sounding a siren. The would-be intruder hears the sirens and leaves, preventing an actual break in.

One limitation of all-in-one panels is that they aren't high-current siren friendly. That's not to say that you can't add one of these sirens, but it takes some work and it can get expensive. Not to mention, where do you put the equipment for it? By allowing the cameras that offer siren sounds to use those sirens in an alarm situation you're adding extra sirens to the system at no additional cost, assuming you planned to have compatible cameras anyway. In my opinion, this is a great new feature. It's also an example of how Alarm.com continues to add value to their products without requiring additional investment.

On the last Monday in May, we here in America celebrate Memorial Day. This tradition started after the Civil War. Known then as Decoration Day, it was meant as a day to decorate the graves of those who had died in battle. The tradition may have changed over the years, but each May, we pause.

For the younger crowd, Memorial Day means school's out, summer is starting, the pool is open, and there's going to be a cook-out or some other type of food-centric get-together. But the older folks among us know that this began as a more solemn holiday.

On May 30, 1868 the first official "Decoration Day" was held at the newly formed Arlington National Cemetery. It was meant as a way to honor those who gave their lives during the Civil Way. James A. Garfield, Ohio senator, former Union Major General and future President of the United States spoke, beginning a yearly tradition. Below is a portion of his speech:

"I am oppressed with a sense of the impropriety of uttering words on this occasion. If silence is ever golden, it must be here beside the graves of fifteen thousand men, whose lives were more significant than speech, and whose death was a poem, the music of which can never be sung."

At this point, Decoration Day was not an official holiday. However, by 1890, every union state had adopted a Decoration Day. As years passed, and other wars were fought, Memorial Day began to be the preferred name and people went forth on Memorial Day to honor those who had fallen in any war or conflict.

In 1968, the United States passed the Uniform Monday Holiday Act. This act put major holidays on particular Mondays so that federal employees could have three-day weekends. Memorial Day, Washington's Birthday, Labor Day and Columbus Day were among these Monday holidays. The same act also officially named the holiday "Memorial Day".

We at Alarm Grid pause to honor those who made the ultimate sacrifice for our freedom. Our offices will be closed on Monday May 27, 2024 and will reopen the following Tuesday at 9:00 am. If you have a support question or need to make adjustments to your account, the monitoring station cannot assist you with that type of request. Instead, send an email to support@alarmgrid.com with details about what type of assistance you need. Remember that when we return after the holiday, there may be a slight support backlog. Please be patient while we work through any issues as quickly as possible.

Of course, our central station partners, Criticom Monitoring Service (CMS) and Rapid Response, will be available 24/7. All signals sent by your Alarm Grid monitored system will be handled as usual during the holiday, unless you've requested a change beforehand. If you need to contact the central monitoring station, to cancel a false alarm or verify a signal, customers in the US can contact Criticom Monitoring Services (CMS) by dialing (888) 818-7728 and choosing Option [9].

Our Canadian customers can contact Rapid Response at (800) 932-3822. Remember when you call either monitoring station, you will need to provide your name, address, and your false alarm password or phrase. Providing incorrect information when asked will result in the dispatch of authorities.

We hope the weather is beautiful, the food is delicious, and the pool is cool and inviting. Just remember, there is a reason we have this day of reflection. So spare a moment to think of those who aren't here so that we can be. Say a quiet "Thank you" to those who made the ultimate sacrifice in the name of these United States.

Users with Lyric Controllers still installed are trying to use PROSIX PROSeries sensors with the Lyric panel. This is a mistake as the Lyric does not support any PROSIX devices. Instead, those users should be purchasing either SiX Series or 5800 series wireless sensors for the Lyric panel.

Below you can see the PROSIXGB, glass break detector. It is compatible only with PROSeries systems:

This has apparently become such an issue that Resideo put out a MyWebTech Technical Notification advising dealers what will and won't work with the Lyric. If you have a Lyric Controller, be sure that you only purchase SiX Series devices, 5800 Series uni-directional devices, or 2GIG Non-encrypted devices to work with your panel.

As always, we recommend that you update your panel to the latest firmware. If you are an Alarm Grid customer and you need help with a firmware upgrade, send us an email to support@alarmgrid.com.

From the images shared above, you can see how easily PROSIX and SiX Series devices can be mixed up. Even people that are very familiar with these products can easily get them confused if they aren't careful. But notice in the bottom image, there is a notice that shows the SIXGB is compatible with the Lyric. The image at the top makes no mention of the Lyric.

Based on the Technical Notification, I believe the PROSIX sensors must be capable of pairing with the Lyric. However, once that happens, things don't go as planned and the PROSIX sensor learned in with the Lyric doesn't behave as expected. For that reason, Resideo and Honeywell Home want to be sure everyone understands the following:

1. PROSeries or PROSIX sensors are not compatible with the Lyric and are not intended for use with the Lyric Controller.
2. SiX Sensors are packaged and labeled for use with the Lyric. PROSIX and SiX are different protocols. A SiX Series sensor that was used on a Lyric can be added to a PROSeries panel. At that point it will be updated, and will become a PROSIX Sensor. From that point forward, it will never work with a Lyric again.
3. The Lyric panel also supports 5800 Series uni-directional wireless and non-encrypted 2GIG 345 MHz sensors.
4. If you need a sensor for a Lyric and cannot find a SiX Series sensor that suits your needs, find a 5800 Series sensor that will. Do not attempt to make a PROSIX sensor work with the Lyric.

You can see in the images above that the SiX and PROSIX devices are packaged differently. SiX Sensors carry a badge on the packaging that clearly identifies them as compatible with the Lyric. PROSIX do not. Another way you can tell is by checking the device firmware.

PROSIX sensors will have firmware versions that begin with the digits 2, 4, 5, or 6. On the other hand, SiX Series devices will have a firmware version that begins with the digit 0 or 1. You can find the firmware version by checking in the Zone Programming screen of the panel. Your alarm dealer can also check it by looking in AlarmNet360.

Alarm.com will soon add a Discover tab to both the customer app and website. This page will educate you, the customer, about the features and capabilities of your system. It will also show recommendations for new features you can set up, or that you can add after discussing with your dealer.

Below, the Discover Tab is shown as seen in the Customer App:

Alarm.com continues to innovate constantly. They'll soon be rolling out another innovation in the form of the Discover tab. This will show up as a new menu selection in both the customer app and website. Within the Discover tab, you will see short-form content that empowers you to take full advantage of all the features currently available with your system.

Below, the Discover Tab is shown as seen in the Customer Website:

In addition, the content provided will introduce new features and recommendations for you based on your current system configuration. This will highlight new or additional features you may want to take advantage of. If a feature is currently available with your existing plan, you will see a "Setup" button at the bottom of the section where you can configure the feature. Some cards provide information only. Those cards won't have a "Setup" option.

There will be four (4) categories of information provided in the Discover Tab. They are:

• New: This section will contain information about new products and features that are available in Alarm.com. Any featured item with a "Setup" button is available to you currently, without adding any equipment or changing your monitoring plan.
• Recommended: This section will contain ten (10) recommended products and features that you're currently not using. If a card has a "Learn More" button, clicking it will take you to the knowledge base, where you can learn more about the feature. These options may require a plan or equipment update.
• Features: Here, you can view general products and features available to use with Alarm.com.
• Expand My System: This section will highlight products and features that you can add to enhance your system and better secure your home or business. These options will usually require you to add products or update your plan.

We don't have a firm date on when the Discover option will be rolled out. Presumably, it will require an app update, so that's one way to be on the lookout for it. So far, my Alarm.com app is showing that it's up to date, so I'll be on the lookout for an update in the near future. If you try out this new educational resource, drop a comment below and let us know what you think. As always, we look forward to hearing from you!

We first told you about the First Alert® VX5 Indoor Camera in our ISC West blog earlier this year. The VX5 debuted at the trade show. However, it's still not available for purchase. That's pretty routine, announcing a product that nobody can get yet. But, here's what we know about it so far.

For one thing, it looks like that ⬆. It is attractive and unobtrusive. This is an indoor camera that can be mounted to the ceiling, wall, or can sit on any flat stable surface. It requires a wired connection to power, but is otherwise wireless. Using Total Connect 2.0, live video and clips can be viewed from any location where the user has access to either a cellular or WIFI connection to the internet.

Advanced Event Detection

The VX5 Indoor Camera offers advanced event detection using state-of-the-art AI. It can tell the difference between a person, animal, or vehicle, and can alert you to the same. This AI capability will no doubt pay dividends down the road, and I can foresee new features being added that also capitalize on it.

Offers Video and Audio Capabilities

The VX5 is capable of 2MP resolution, which gives sharp, detailed images in both day and night vision situations. The ability to both hear and communicate with anyone in the camera's vicinity allows the user to engage with those being viewed. This can be used as a deterrent if you catch a person (or animal) lurking in an area where they don't belong.

Automated Privacy Mode

Privacy is on everyone's mind these days. The VX5 offers both a manual privacy setting, as well as automated privacy settings. Privacy Mode can be selected from the Total Connect 2.0 app or by pushing a button on the camera itself. Privacy Mode prevents the camera from recording any video or audio. When integrated with one of the PROSeries security panels, the privacy shield will come on automatically when the system is disarmed and turn off when the system is armed.

Remote Access Using Total Connect 2.0

The new First Alert® VX5 Indoor Camera leverages the user's Total Connect 2.0 subscription, giving remote access and notification capability to any of the VX cameras associated with the account. For Alarm Grid customers, a Platinum Plan (Self or Full) will support up to eight (8) VX cameras with 30-days of recording capability. If you need more than eight (8) cameras, you can add a Video-Monitoring Plan, which doubles this support.

In Summary:

The First Alert® VX5 Indoor Camera is a much-needed addition to Resideo's Total Connect 2.0 camera lineup. It offers a fresh look and modern features that consumers want in a camera. They're taking a "one-size-fits-all" approach so far, so let's hope this camera performs in the way we expect.

This camera is still considered to be in the Beta stage of development. That means:

• It could still be a while before it's released.
• Anything we've been told about it so far could be changed before it's released.

One thing that's not likely to change is how it looks, so the picture above should be accurate. As for everything else, we'll just have to wait patiently for it to be released then hopefully, we'll see.