Smart Home Posts

Hi DIYers! We're here with the Alarm Grid video recap covering October 21st thru 25th. We have eight (8) new videos this time. These videos proudly feature the Alarm Grid boys Jarrett, Joe, and Jorge. We hope you're ready to learn more about security systems! Let's check out the videos!

Issues Disabling Auto-Stay Arming for a Vista-128BPT

Joe talks about issues regarding Auto-Stay Arming on a VISTA-128BPT running firmware version 10.0. This firmware version has an error where Auto-Stay Arming is not automatically disabled when arming from Total Connect 2.0. This can cause issues if you Arm Away from Total Connect 2.0 and you aren't around to fault an Entry/Exit Zone during the Exit Delay countdown. When this happens, Auto-Stay Arming will go into effect for any zone where the feature is enabled.

Connecting The Lyric Alarm System to Alexa

Jorge explains how you can connect the Resideo Lyric Security System with Amazon Alexa for spoken voice commands. In order to do this, the Lyric Alarm System must be paired with the Total Connect 2.0 platform. Any voice commands for the Lyric System sent through Alexa will pass through Total Connect 2.0 before being forwarded to the panel. You can use Alexa voice commands through TC2 to arm the system, check current status, and control smart home devices.

Why Your Vista-128BPT is Armed Stay After Choosing Arm Away from TC2

Joe explains why you might find that your VISTA-128BPT Security System has Armed Stay even though you have selected Arm Away on Total Connect 2.0. This is due to the error on Firmware Version 10.0, were the TC2 platform doesn't know to automatically ignore Auto-Stay Arming settings if they are enabled. You can overcome this issue by upgrading to Firmware Version 10.4, or by manually disabling Auto-Stay Arming for every zone on the VISTA-128BPT Alarm System.

The Honeywell Lyric Security System Will Allow for Different User Codes

Jorge explains how you can set up multiple user codes on a Honeywell Lyric Alarm Panel. You need to provide a valid code to perform various system functions such as arming and disarming. Additionally, the Master Code and Installer Code both have special privileges on the system as well. The Installer Code is particularly important, as it is needed for programming the system. However, you can only disarm using the Installer Code if it was the code used to arm originally.

Using More Than One SkyBell With Total Connect 2.0

Jarrett explains how you cannot use more than one (1) SkyBell device with a Total Connect 2.0 account. If you want to use a second SkyBell Video Doorbell, then you will need a second Total Connect 2.0 account. Alarm Grid customers can add one (1) SkyBell to any Total Connect 2.0 account, even if their plan does not technically include video surveillance. We offer a special Video-Only Plan, which is perfect if you already have an alarm monitoring plan, but you are needing a second account to add a second SkyBell device.

Why A Legacy IPCAM Won't Work With Total Connect 2.0

Jarrett explains an issue that you might encounter when trying to use a legacy Total Connect 2.0 IP Camera with the TC2 platform. The older legacy TC2 IP Cameras have default software that is not compatible with the new HTML5 version of TC2. Resideo pushed down an update to these cameras to make them compatible with the new HTML5 platform. But any legacy TC2 IP Cameras that weren't connected at the time were unable to receive the update. Those cameras can no longer be used with TC2.

How a Qolsys IQ Panel 2 Behaves When the Internet Goes Down

Jorge explains what happens when a Qolsys IQ Panel 2 Plus System loses its internet connection. When this happens, the system will remain connected with Alarm.com using its built-in LTE cellular communicator. All versions of the IQ Panel 2 Plus have an integrated cellular communicator for this exact purpose. You can choose from AT&T LTE or Verizon LTE. We recommend going with the service that works best in your area, regardless of which one you use for your personal phone.

Resetting A Qolsys IQ Panel 2 to Factory Defaults

Jorge covers the process for factory resetting a Qolsys IQ Panel 2 Plus System. This is done using the Dealer Code, which is 2222 by default. By performing a factory reset and restoring the system to factory default settings, several things will happen. Any programming settings will be restored to their default. All programmed sensors will be deleted. All Z-Wave devices will be cleared. All user codes will be deleted, with the exception of default codes. If you changed the Master, Installer, or Dealer Codes, they will all be reset to their default.

Hi DIYers! Today, we wanted to quickly discuss some of the various integrations that have been made available for Alarm.com. We will be checking out the Sonos, Legrand, Rachio, and Rain Bird integrations. They are great for any ADC user who wants to control their audio or irrigation system!

If you have a smart audio system from Sonos or Legrand, or a smart irrigation system from Rachio or Rain Bird, then it is likely that you can set it up for use with Alarm.com. This will allow you to control your audio or irrigation system conveniently from the Alarm.com Mobile App. All you need to do is have the appropriate options enabled for your Alarm.com account and complete a simple pairing process.

The Sonos and Legrand Audio Systems can also be included with Alarm.com Smart Scenes to have your music or audio play automatically based on a schedule or with certain system events. Your sound system can even be set to activate alongside other devices, including your smart lights, thermostat, door locks, and even your security system! This is perfect for creating the perfect scene for listening to music or your favorite podcast! You might also run a scene while you are away to make it appear like you are really home.

Meanwhile, the Rachio and Rain Bird Irrigation System integrations offer their own benefits. You can use the Alarm.com Mobile App to set your irrigation system to a Rain Delay, initiate watering for any irrigation zone for a set period of time, and view the last time a zone was watered. Additionally, the Irrigation Card from the main screen of the Alarm.com Mobile App will show the current status of your irrigation system.

In order to use Sonos and/or Legrand with Alarm.com, you must have the Audio Integration Service Package Add-On applied to your Alarm.com account. Likewise, you will need to have the Irrigation Service Package Add-On Applied to your Alarm.com account if you plan to use Rachio and/or Rain Bird with Alarm.com. Keep this in mind before you go to complete one of these integrations.

Alarm Grid will apply the Audio and Irrigation Add-Ons to any Alarm.com account at no additional charge. You just need to have an Alarm Grid monitoring plan with access to Alarm.com. Any customer with a Gold or Platinum Plan and a compatible Alarm.com Security System can access the Alarm.com platform. This includes any Self or Central Station Plan. We recommend checking our monitoring page for more information.

At this time, the Sonos, Legrand, and Rachio integrations can all be completed by an end user through the Alarm.com Mobile App. Just make sure that the appropriate Audio or Irrigation Add-On has been applied to your Alarm.com account. However, the Rain Bird integration must be manually performed by your alarm monitoring company. For more information on completing any of these four (4) integrations, we recommend checking out one of the following FAQs:

• Can I Use Sonos Audio With Alarm.com?
• Can I Use Legrand Audio With Alarm.com?
• Can I Use a Rachio Irrigation System With Alarm.com?
• Can I Use a Rain Bird Irrigation System With Alarm.com?

If you are an Alarm Grid customer and you need a service package added to your Alarm.com account or you need help setting up any of these integrations, then you should email us at support@alarmgrid.com. You are also invited to email us if you are interested in our monitoring services and you would like to learn more. Remember that our support hours for responding to emails are from 9am to 8pm ET M-F. We look forward to hearing from you!

Hi DIYers! Today, we want to discuss an unusual quirk we found with Alarm.com. It turns out that the Alarm.com platform cannot receive alerts from temperature sensors. This is important for any Alarm.com user who wants to receive remote alerts for unusually high or low temperatures.

When you use sensors with a security system, the expectation is that you will be able to receive alerts from an interactive service platform whenever the device is activated. But with Alarm.com, the platform cannot receive incoming signals from a system regarding faulted Temperature Zones. This means that you cannot use Alarm.com to receive text and/or email alerts regarding an activated temperature sensor.

We discovered this issue due to a customer using a DSC PG9905 Temperature Sensor with a Qolsys IQ Panel 2 Plus System. We quickly discovered that the issue also applied to any temperature used with an Alarm.com Security System. This is important to note, as we know that many users out there will want to know about any unusual temperatures in their homes and businesses. Many people rely on using these sensors with their security systems so that they know if their HVAC systems break before serious and expensive damage occurs.

Fortunately, there is still another way you can receive alerts from Alarm.com regarding an unusually high or low temperature. If you pair a Z-Wave thermostat with your system, then you can set up notifications to be sent out whenever the detected temperature goes outside of a set threshold. A good Z-Wave thermostat to use for this application is an Alarm.com ADC-T3000 Thermostat. This thermostat also supports the ADC-S2000 Temperature Sensor, which will allow you to monitor the temperature in a second area of the building as well.

Another option is to use the Total Connect 2.0 platform with a Resideo Security System instead. Unlike Alarm.com, the Total Connect 2.0 service can be set up to send out text and/or email notifications for any sensor type, including temperature sensors. The Resideo LYNX Touch and Lyric Systems also have designed Temperature Zones that are used with Z-Wave thermostats to end high-low temperature alerts to AlarmNet360 and TC2 whenever an unusual temperature is detected. Just make sure that any Temperature Zone is noted as such on your central station document. These zones are frequently mistaken for 24-hour auxiliary medical zones.

If you have any questions about the functionality of temperature sensors, the Alarm.com and Total Connect 2.0 platforms, or any of our other products or services, please email us at support@alarmgrid.com. Remember that our support hours are from 9am to 8pm ET M-F. We also recommend checking out our monitoring page to learn more about our monitoring services. We look forward to hearing from you and providing top-quality monitoring service for your home or business.

UPDATE: This issue was later addressed in Qolsys IQ Panel 2 Plus Firmware Update 2.5.0. Please see this post for more information.

Hi DIYers! We know by now you are probably aware of the Alarm.com integration for Amazon Alexa. Today, we just wanted to remind you of the superb features and functions this integration offers and how it can make your life more convenient. Prepare to learn about the Alarm.com Alexa Skill!

It goes without saying that Amazon Alexa is one of the most popular smart home automation platforms available today. This is due in large part to its accessibility. An Alexa Hub is extremely easy to set up and use. And since so many people use Amazon Prime for ordering products online, they realize that adding a simple Alexa Hub in their homes makes sense.

There are many functions you can perform through Amazon Alexa voice commands if you have an Alarm.com Security System. You can have Alexa arm your system, check the current system status, perform entire smart scenes, and control individual Z-Wave smart home devices. Truly, the automation features offered from Alexa voice commands for Alarm.com are particularly exciting.

Alexa even allows you to set up special "Secure Commands" for Alarm.com, which include disarming your system, opening your garage door, and unlocking your Z-Wave door locks. These Secure Commands require you to provide a valid PIN code when speaking with Alexa. This way, you can be sure that it is you or someone you trust controlling your system through the hub!

To get started using Amazon Alexa with Alarm.com, you must first have access to the Alarm.com Platform. This will require having a system with a compatible Alarm.com Cellular Communicator. You will also need to get an alarm monitoring plan that includes access to Alarm.com. Two of the best plans to choose from are the Alarm Grid Gold Plan and the Alarm Grid Platinum Plan. You can learn more about these plans, plus all our other monitoring plans, on our alarm monitoring page.

Once your system is activated for monitoring service, and you have successfully created your Alarm.com account, you can then enable the Alarm.com Alexa Skill. Simply search for Alarm.com in the Skills & Games section of the Alexa App, and locate the Alarm.com Skill. You will need to provide your Alarm.com account information when you go to enable the skill. This will allow Alexa to communicate with your Alarm.com account.

You can then try controlling your system and paired smart home devices through Alexa voice commands! Remember that commands for use with your system will lead in with "Alexa, tell Alarm.com to..." As long as you remember that, you will have no shortage of exciting and convenient voice commands that you can use with Amazon Alexa and Alarm.com!

If you have any questions, then remember that the Alarm Grid Support Team is happy to help! We will answer any questions you have about the Alarm.com Alexa Integration or about the Alarm.com platform or our monitoring services in general. The best way to contact us if you have questions is to email support@alarmgrid.com. Remember that our support hours are from 9am to 8pm ET. We look forward to hearing from you!

Hi DIYers! Today, we plan to talk about some of the specifications of Z-Wave Plus and how the protocol has been improved over classic Z-Wave communication. Setting up some Z-Wave Plus devices with your system is a great way to get started in the exciting world of home automation!

You probably see us talking about Z-Wave Plus all of the time, but you might not know why we get so excited about it. If you didn't know, Z-Wave Plus is a wireless communication protocol that is frequently used with smart home devices. This includes peripherals like smart lights, door locks, programmable thermostats, and more. Many of the systems we sell and support include built-in Z-Wave controllers so you can start pairing these convenient devices. Today, a collective group called the Z-Wave Alliance is working to further improve upon this robust and convenient form of local wireless communication.

By nature, Z-Wave offers many important advantages. Wireless communication makes installation and set up super easy, which is great for DIYers who don't want to hire a professional installer. And by using them with your monitored security system, you can operate these devices remotely through an automation platform like Total Connect 2.0 or Alarm.com. Both platforms offer their own mobile app so that you can control these devices from virtually anywhere! And you can even establish smart scenes so that your Z-Wave devices operate automatically based on a schedule or with certain events on your system. How cool!

But not all Z-Wave devices are created equal. More recently, we have seen the rise of "Z-Wave Plus" devices, also known as 500-Series devices. This is as opposed to what we sometimes refer to as "classic Z-Wave" devices, or 300-Series devices. When given the option, you will definitely want to go with the newer and more advanced Z-Wave Plus 500-Series devices. This will provide you with the best possible end user experience.

Before we get into Z-Wave Plus specifications, we want to quickly mention what you will need to achieve a Z-Wave Plus setup. To unlock the full potential of Z-Wave Plus, you will need a Z-Wave Plus controller and certified Z-Wave Plus devices. You can use classic Z-Wave devices with a Z-Wave Plus controller, but you will only get the functionality of classic Z-Wave.

Likewise, you can use Z-Wave Plus devices with a classic Z-Wave controller, but again, you will only have the same 300-series functionality. If you want true Z-Wave Plus, you must have a Z-Wave Plus controller and certified Z-Wave Plus devices. Check for the label shown at the top of this post to determine if a device is Z-Wave Plus. That label should be found somewhere on the product box.

Now that we have that out of the way, you might be wondering what's the big deal about Z-Wave Plus. After all, you can technically do anything with classic Z-Wave that you can do with Z-Wave Plus. The thing is though, Z-Wave Plus can do it better. This comes down to a few different considerations. Namely, Z-Wave Plus offers further range, extended battery life, and better reliability overall.

When it comes to Z-Wave range, signal hopping is key. Z-Wave signals actually have the ability to "hop" through other Z-Wave devices. Each time a "hop" occurs, the signal is repeated to extend the range. A Z-Wave signal can make up to four (4) of these hops on its way to the intended destination. By adding more Z-Wave devices, you are establishing a stronger mesh network.

Z-Wave Plus devices allow for about 50 to 60 feet between hops. So you can expect a roughly 200 foot range for a Z-Wave Plus device if you have a strong mesh network for signal hopping. Conversely, a classic Z-Wave device will only offer a range of about 30 to 40 feet between hops. That's only a range of about 120 feet with a strong mesh network. By using exclusively Z-Wave Plus devices, you are getting a roughly 66% increase in range!

Battery life is also something to consider for Z-Wave devices that do not plug in or connect with electrical wiring. This is common for most Z-Wave locks and even some thermostats like the Honeywell T6 Pro Z-Wave. The Z-Wave Alliance designed Z-Wave Plus devices to consume less power, which has improved their expected battery life by about 50%. This will save you money with fewer required battery changes!

Lastly, you should consider the fact that Z-Wave Plus offers better reliability than classic Z-Wave. This is important for ensuring that any Z-Wave commands and signals ultimately reach their intended destinations. Certified Z-Wave Plus devices are also required to support Security S2, which includes complete Diffe-Hellman Symmetric Encryption for enhanced security. And perhaps most importantly, Z-Wave Plus devices can receive firmware updates over-the-air (OTA), allowing developers to streamline any needed improvements.

The future certainly looks bright for Z-Wave, as the Z-Wave Alliance is currently working on 700-Series Z-Wave Communication. This represents the future over the current Z-Wave Plus 500-Series. We do not have the details on 700-Series, including when it will be made widely available, but it is expected to communicate up to 150% further, while using even less power for improved battery life! These devices will also offer enhanced processing for signal transmissions that are up to 18% faster.

At this time, no security systems support 700-Series technology. But there are still fantastic systems like the Qolsys IQ Panel 2 Plus which support Z-Wave Plus 500-Series communication. With Z-Wave on your side, you can truly make your alarm system stronger than ever and achieve a more convenient life! If you have any questions about Z-Wave technology, you are welcome to email us at support@alarmgrid.com. Remember that our support hours are from 9am to 8pm ET M-F. We look forward to hearing from you!

Hi DIYers! Last week, we sent a small team to Silicon Valley, California to check out the 2019 Qolsys Summit. Needless to say, we were absolutely blown away with what Qolsys will soon be offering. Today, we would like to focus on some of their new industry-changing products in the pipeline.

The biggest highlight of the Qolsys Summit was the opportunity to check out the newest upcoming panel from the company, the Qolsys IQ Hub. The IQ Hub represents the vision of Qolsys to bring home security closer and more accessible to the average consumer than ever before. This is truly the optimal system for any budget-conscious consumer who wants to bring state-of-the-art security and technology into their home. It is slated for a Q1 2020 release.

We do not have all the details on the Qolsys IQ Hub quite yet. But there is still a lot that we can talk about. The most obvious addition to the Qolsys IQ Hub is its prominent speaker on the front. Qolsys is expected to introduce some mind-blowing integrations for the system that will turn your alarm control panel into a compact entertainment center.

Remember that Alarm.com already offers an excellent Sonos integration. We are sure that the IQ Hub will take full advantage of this feature and truly put it to great use. Our team did get a chance to test the IQ Hub sound quality, and we can confirm it sounds just as good as any high-end portable speaker. This is highly impressive, and we expect many users to be thrilled that their alarm system can now essentially double as a party-starter.

The next aspect you will likely notice about the IQ Hub is its standout display screen. This is a 7" touchscreen display that appears to have even higher resolution than any existing security system on the market. We do not have the exact specifications on the screen just yet, but it certainly passes the eyeball test. And as you can see from the photo above, the slideshow feature returns. Get ready to show-off some of your best photos on the Qolsys IQ Hub!

As we mentioned earlier, Qolsys seems to be envisioning the IQ Hub as a way to make the home security market more accessible to the average consumer. The new system is not expected to replace the existing Qolsys IQ Panel 2 Plus, but it is anticipated to have a lower price point. We also expect many existing features to return to the IQ Hub, including built-in WIFI, Bluetooth connectivity, cellular LTE, and Z-Wave Plus functionality.

One thing that will not be returning to the IQ Hub is support for legacy sensors (e.g. 319.5 MHz, 345 MHz, and 433 MHz devices). The new system will be entirely PowerG, and you will need to use those sensors with the system. This is fine, as PowerG Sensors offer an impressive wireless range of up 2,000 feet when used with the IQ Hub in open air. They also utilize military grade 128-bit AES encryption in all their communication to ensure maximum wireless security.

Another interesting note about the panel is that it is not designed to be opened up. This is a significant change from most existing security systems, where you will occasionally need to open up the panel to make hardware changes. The battery on the IQ Hub is sled-replaceable, and it can easily be swapped out by the end user with little effort. All of the hardware is built right in, so you will never have to make any changes in that regard. Talk about DIY friendly!

Qolsys made other various enhancements to the IQ Hub System. They touted an improved integrated camera, and it can even double as a motion sensor by detecting changes in pixelation. We also expect this feature to be used in conjunction with Alarm.com so that you can take a peak-in at your home while you're on the go. You will also notice the LED light on the front of the panel. This light changes colors to let you know the current system status. How cool!

The system also features a built-in microphone that you can use to get alerts regarding loud sounds. You can even adjust the minimum sound level required to trigger alerts. This is perfect for parents who want to know if their baby is fussing or for owners of rental properties who may want to be alerted if their guests are throwing a loud party. It's just another way that Qolsys is working hard to keep you connected with your home.

We do expect that there will be some hardware limitations of the IQ Hub when compared with the IQ Panel 2 Plus, especially when you consider the anticipated lower price point. Qolsys most likely reduced costs by dropping legacy sensor support. It's also possible that the IQ Hub will support fewer zones than the IQ Panel 2 Plus (128 zones). But we cannot confirm the exact number of zone on the IQ Hub at this time. The IQ Hub is also slightly larger than the existing IQ2+ due to the added speaker.

As stated earlier, the Qolsys IQ Hub is scheduled for a Q1 2020 release. This groundbreaking new system is sure to make some big waves in the security industry, and we are confident that it will help many new users get their start with home security. We can't wait for its release, and we hope you're excited too!

Qolsys also unveiled another interesting product at the event, the Qolsys IQ Router. At first glance, you might be wondering what's the big deal. What's so exciting about an IP router? Well Qolsys packed in some game-changing features that are sure to make the IQ Router the perfect addition to your IQ Hub or IQ Panel 2 Plus System. It is sure to make your life more convenient in many ways. And we can also confirm, it is dual-band with support for 2.4 GHz and 5 GHz!

At the basic level, the IQ Router is exactly what it sounds like, an internet router. It replaces the existing router for your home's IP network. But what you get with the router is pretty ingenious. Any Qolsys IQ Panel 2 System or Qolsys IQ Hub connected with the IQ Router can be accessed remotely by your alarm monitoring company for programming purposes. This is similar to what the DSC Iotega offers. But with the Qolsys Systems, it is optional rather than mandatory.

Of course, if you don't want your monitoring company accessing your panel, then you can disable the feature. But it's pretty nice if you want assistance with programming new devices. One thing you will certainly love is its ability to auto-discover your IQ Hub System and automatically enroll it with your WIFI network. You can even configure your IP settings right from the IQ Hub. This truly makes the IQ Hub the central controller for your entire network!

Another innovation from the IQ Router is the ability to auto-enroll guest WIFI devices. In other words you can get any visitors on your WIFI network, without making them enter a long, tedious password. The way this works is that your guest will request to join the network from their IP device. You will then approve the request from either your IQ Hub or an app on your phone. And just like that, your guest will be connected with your WIFI network. Super convenient!

As you will notice, the Qolsys IQ Router only has one (1) LAN port for connecting a hardwired ethernet device. This isn't a big deal, as most users might not even need one. If you need additional ports, then you can easily connect a network switch to the router and use it however you would like.

But one very exciting feature of the IQ Router is its ability to support up to eight (8) WIFI extenders or access points. This makes it truly suitable for even large commercial locations! The router facilitates a total mesh network to help ensure that all of your IP devices stay connected across even an incredibly expansive area. Whether your needs are big or small, you are sure to get great use out of the new IQ Router! Qolsys states that it should be out by the end of this year.

We would like to end this post with some smaller product announcements we heard at the Qolsys Summit. A PowerG 360-Degree Ceiling-Mount PIR Motion Sensor called the PG9862 was unveiled. This sensor is perfect for use in closets or in commercial locations where corner-mounting is not feasible. The PG9862 is available from Alarm Grid now, and you can get it right here.

Lastly, we heard rumors about a much-anticipated PowerG Wired to Wireless Converter. This is huge news, as it will allow you to takeover an existing hardwired system and use a Qolsys IQ Panel 2 Plus or Qolsys IQ Hub in its place. And of course, all your hardwired sensors will enjoy the amazing range and security of the PowerG wireless protocol. We do not have any other details on the PowerG Converter at this time, but we will definitely keep our eyes peeled.

We hope that you are eagerly awaiting all of these new products just like we are! This was truly an awesome event that Qolsys put on, and we are thankful that we got to be a part of it. We are hopeful that Qolsys hosts a similar gathering next year in 2020! For now, check out these new and upcoming products, and email us at support@alarmgrid.com if you have any questions or thoughts. Remember that our support hours are from 9am to 8pm EST M-F. As usual, we look forward to hearing from you!

Hi DIYers! We have a quick video recap today, with four (4) new videos this week. Three videos featuring Jorge were uploaded on Thursday, September 19th. Another featuring Joe was uploaded a day later. We hope these videos help you out. Let's take a look at the newest videos from Alarm Grid!

Finding the Installer Code on a VISTA-21iP

Jorge explains what to do if you do not know the Installer Code on a Honeywell VISTA System. You use the command [Installer Code] + [800] to enter programming. If you do not know the code, then you should first try the default code of 4112. If that doesn't work, then you might try to get in using the backdoor method. If the backdoor method fails, then you should try asking the previous monitoring company or system owner for the Installer Code.

Setting Up TC 2.0 on a Phone

Jorge shows you how to set up Total Connect 2.0 on a phone. The Total Connect 2.0 Mobile App is available for Android and iOS devices. You can get it for free from the Google Play Store or the Apple App Store. Once you have the app, you can login using your Total Connect 2.0 account, just like you would from the website. If you don't have access to Total Connect 2.0, then you might want to check out one of our monitoring plans to get access. Remember, TC2 is for Honeywell Panels only.

Linking a Honeywell Lyric Alarm System to HomeKit

Jorge explains the process for linking a Honeywell Lyric with Apple HomeKit. This will let you use the system with the rest of your HomeKit network. You can also get notifications regarding system activity, and you can control your system using Siri voice commands from your iPhone. For best results, you will want to have a proper HomeKit Hub established. You will also want to continue to use Total Connect 2.0 alongside HomeKit, as TC2 will provide more detailed alerts for the Lyric System than HomeKit.

Programming the 5800COMBO to a VISTA Panel

Joe teaches you how to enroll a Honeywell 5800COMBO with a Honeywell VISTA Panel. In order to use this wireless 345 MHz sensor from the Honeywell 5800 Series, you must add a wireless receiver to the system. This combination sensor will provide the smoke & heat detection, carbon monoxide detection, and freeze detection. Each function will require its own wireless zone on the system. You can also program a additional zones for maintenance detection and end of product life detection.

Hi DIYers! Today, we wanted to talk about how you can use Lutron Caseta on Alarm.com. This is a great way to have your Alarm.com Security System and your smart lights on one convenient platform. Controlling the devices in your home has never been this simple, and getting started is easy!

As you may know, the Alarm.com integration for Lutron was made possible with the release of the PRO-model for the Lutron Caseta Smart Bridge. At this time, Alarm Grid offers the Lutron Caseta Smart Bridge PRO 2 for integrating Lutron Lights with Alarm.com. You might also know the Smart Bridge PRO 2 as the Lutron L-BDGPRO2-WH. Both names refer to the same device. With it, you can integrate all you Lutron accessories with Alarm.com.

The Lutron Caseta Smart Bridge PRO 2 serves as the central hub for your Lutron Smart Lighting setup. All your Lutron devices will communicate with this hub. This includes any Lamp Dimmer Modules, In-Wall Switches, In-Wall Dimmers, and Pico Remotes. Setup is extremely straightforward. Just connect the smart bridge to your IP router using an ethernet cable. Then pair your Lutron devices using the Lutron Mobile App. You can pair up to 50 Lutron devices.

Being able to control your Lutron Smart Lights with Alarm.com offers many advantages. For one, you can use the Alarm.com App for virtually all of your home automation control. This will allow you to control your lights from pretty much anywhere. You can also include all your Lutron Lighting devices into Alarm.com for automation operation. For example, you might have your lights turn on whenever you disarm your security system or unlock your Z-Wave door lock.

One other aspect we want to mention is the fact that both Alarm.com and Lutron are compatible with Sonos. If you didn't know, Sonos is highly respected in the smart audio community, and they have been making some outstanding sound systems and speakers throughout the years. Your can integrate your Sonos setup with Alarm.com to have music play automatically based on scenes. Lutron even offers a special audio Pico Remote specifically for use with Lutron!

Remember that you will need an alarm monitoring plan that includes access to Alarm.com to get started using the platform. Alarm Grid customers can choose from one of our Gold or Platinum Plans. More information is available on our monitoring page. From there, we will be happy to help you get started using Lutron Caseta on Alarm.com. If you have any questions, please email us at support@alarmgrid.com. We look forward to hearing from you!

Hi DIYers! It's time for our video recap again, this time covering September 9th thru 13th. We have five (5) new videos this time featuring Jarrett, Jorge, and myself. We have been getting some positive feedback regarding our videos lately, thank you so much! Let's check out the new ones!

Enrolling the 2GIG PAD1-345 Wireless Keypad to the 2GIG GC2

I show you how to enroll a 2GIG PAD1-345 with a 2GIG GC2 Security System. The 2GIG PAD1-345 is a relatively simple push-button keypad that is great for basic arming and disarming. You can keep it by a second entrance in your home or business so that you can arm and disarm as you come and go. It is also compatible with other 2GIG Systems. These include the 2GIG GC2e, the 2GIG GC3, and the 2GIG GC3e.

Using a WIFI Communicator with a Honeywell Alarm System

Jorge from Alarm Grid talks about using a WIFI communicator with a Honeywell System. This can be a great way to monitor your system if you have WIFI in your home or business. IP communication is known for being fast and relatively reliable for the most part. You just need to be wary of internet outages, as they will leave your system unmonitored. For that reason, you might want to get cellular backup for your system as well.

Using L7000 Alarm Panels Together

Team MVP Jorge explains how you cannot use two Honeywell L7000 Systems together. As a general rule, it is not possible to use multiple security systems together. You cannot pair one alarm control panel with another alarm control panel. This is true even if they are the same exact system. If you want a second controller for operating your alarm system, then you should get a keypad instead. A good keypad for the L7000 is the Honeywell 5828.

Self-Monitoring an Alarm.com Security System

Super Alarm Grid Hero Jarrett explains how you can self-monitor an Alarm.com Security System. The Alarm.com service is used with many security systems. This service will send you text and/or email notifications regarding any system activity. As a result, it is possible to use an Alarm.com System without it being connected with a central monitoring station. This practice is known as self-monitoring. Just remember, it will be up to you to contact the authorities if needed!

Defaulting a Resideo Lyric Controller

Wonder Boy Jarrett shows you how to default a Resideo Lyric Alarm System. Performing a factory default on a Lyric is normally only done if you are planning to get rid of the system, or as a last resort troubleshooting step. Doing this will reset the Installer Code back to 4112 if it was changed. All zones from the system will be cleared. It will reset the panel time. And all general system settings will be reset back to their default values.

Hi DIYers! We have been talking about the IQ Panel 2 Plus a lot lately. First we revealed the new Firmware Version 2.4.0 upgrade. Then we took an in-depth look at the new firmware. Today, we're going to examine the new Control4 Integration available for the IQ2 on Firmware 2.4.0 or higher.

By using the Control4 Integration, you can control basic security functions for your Qolsys IQ Panel 2 Plus System from your Control4 Touchscreen. This includes arming and disarming from the C4 System. In other words, your Control4 System will become somewhat of a secondary keypad for your IQ Panel 2 Plus System. Meanwhile, you can still use your IQ2 as a primary Z-Wave Controller and have full functionality with Alarm.com. How cool!

The C4 Integration will work with any Qolsys IQ Panel 2 or IQ Panel 2 Plus that is running Firmware Version 2.4.0 or higher. To get started, you will want to download the Qolsys IQ Panel 2 Driver to your Control4 System running OS Version 2.6.0 or higher. The driver can be found within the C4 Driver Database. From there, make sure your IQ Panel 2 and your Control4 System are on the same WIFI network.

Next, turn your attention to your IQ Panel 2 System. From the main screen, click the small grey bar at the top. Choose Settings > Advanced Settings > enter Dealer Code (default 2222) > Installation > Devices > WIFI Devices > 3rd Party Connections > enable Remote Device Access > OK. The panel will then reboot to apply the changes. Return back to the 3rd Party Connections Menu, and click on "Reveal Secure Token". Then apply the token at your C4 System to pair. Remember, you must use the Dealer Code (default 2222) to access this setting. It will not be displayed when using the Installer Code (default 1111).

As this integration is still very new, it is somewhat limited at the moment. Right now, we can only confirm that the integration allows for system arming/disarming from the C4 Panel. It's possible that new features and functions may be released in due time. Still, this is quite a nice integration for anyone with an IQ Panel 2 and a C4 Home Automation setup.

If you have any questions about this integration, please reach out to us. We offer free online and phone support for Alarm Grid monitored customers. The best way to reach us is by emailing support@alarmgrid.com. We will check your email as soon as we can and reply back promptly. If you prefer to call us, you can reach us at (888) 818-7728 during our usual business hours of 9am to 8pm EST M-F. We look forward to helping you with the new Qolsys Control4 Integration!