Home Security Blog

Hi DIYers! We are happy to announce that the Alarm Grid logo will now appear in the lower-left corner of downloaded Alarm.com video clips. This new feature applies to any Alarm Grid customer who uses Alarm.com Cameras for video surveillance. You should notice the logo effective immediately.

The Alarm Grid logo should appear in the bottom-left corner of any downloaded video clip from Alarm.com. This includes any video clip that you choose to share through email, text message or social media. Sharing the clip effectively downloads it. This will count towards your monthly limit of allowed clip downloads. The logo will be semi-transparent so that it is clearly visible, but does not obscure the video in any fashion.

We believe that this new addition will add a nice touch to Alarm.com video clips. It will also help to identify the source of the clip in the event that you ever need to present video evidence to the authorities. Other than this image, you should not notice any changes to your Alarm.com video clips or your Alarm.com service in general.

Please note that this image will not be present in the live video feed for Alarm.com Cameras. The logo will also not appear in clips you view directly from Alarm.com. It will only be present in downloaded video clips.

Below is an example of what the image should look like in a video clip:

If you do not have Alarm.com video surveillance included in your monitoring plan, you can check our monitoring page for more information. You will need a Platinum Plan to use Alarm.com Cameras. We also offer a standalone video surveillance plan if you want to use Alarm.com Security Cameras without regular monitoring service.

Please email us at support@alarmgrid.com if you have any questions about this new feature or the Alarm.com service in general. You may also call us at (888) 818-7728. Our regular office hours are 9am to 8pm EST M-F. We look forward to hearing from you.

DSC decided to extend the lifespan of their Impassa System by releasing a dual-path LTE communicator. The communicator is called the DSC TL8055LTVZ, and it is available for purchase right now from the Alarm Grid website. This is the first LTE communicator for the DSC Impassa Alarm System.

The DSC TL8055LTVZ provides connectivity with the Verizon LTE Network. It uses a hardwired ethernet connection for internet access. If one communication path goes down, the other will be there to back it up. The communicator will allow the system to connect with the Alarm.com Servers. Please note that you will need a Gold Plan or higher to activate the communicator and use it with Alarm.com.

In order to use the DSC TL8055LTVZ, your Impassa Panel must be running firmware version 1.3 or higher. This is the same firmware version required for an Impassa to use any cellular communicator and connect with Alarm.com. If you already have an Impassa System connected with Alarm.com, you can just swap out the old communicator for the new TL8055LTVZ. The system will provide normal operation after you activate the module.

At this time, Alarm Grid does not offer a standalone Impassa System with no communicator installed. We also do not offer an Impassa with a TL8055LTVZ already installed. We only recommend the DSC TL8055LTVZ for customers with an existing Impassa who want to extend the lifespan for their system. With LTE connectivity, the TL8055LTVZ will ensure that your Impassa can stay monitored for many years to come.

If you are looking for a new Alarm.com Security System, then we recommend going with a Qolsys IQ Panel 2 Plus instead. This is a state-of-the-art security system that offers all the features and functions you could ever want. You might also consider waiting for the new 2GIG GC2e and GC3e Systems, which we expect to be available later this summer. However, if you have an existing Impassa, then the DSC TL8055LTVZ is for you.

Additionally, Alarm Grid is also now offering the DSC WS4933 Wireless Carbon Monoxide Sensor. The device uses electro-chemical sensing technology to detect odorless and tasteless carbon monoxide (CO) gas. This sensor features a slim-line design and a built-in 85dB sounder. It comes equipped with a test button and a low-battery indicator. It uses a single CR123A battery for power. The device has an average battery life of five (5) years with typical use. It is available for purchase now.

If you have any questions or concerns about the DSC WS4933 or the DSC TL8055LTVZ, please email us at support@alarmgrid.com. You may also call us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F. We look forward to answering your questions.

Resideo will be pushing down an over-the-air (OTA) firmware update for all AlarmNet LTE Communicators later this month. This update will go through automatically, and it should not affect your monitoring service in any fashion. The update will be applied sometime later this month.

This update only affects the communicator, not the panel itself. The updates will be applied automatically in batches until it has been applied to every Resideo LTE Communicator. First the Verizon LTE Radios will be updated, followed by the AT&T LTE Radios. Resideo will start each update cycle with batches of units that were registered first. The company will follow a sequential order, finishing with batches of units that were registered last. Any new unit that is activated will be placed at the end of the cycle.

It is possible that your system may reboot as part of this update process. However, it should resume normal operation after the update is complete. Additionally, you may notice the following contact ID codes in your Event Log on Total Connect 2.0:

Resideo says that this update will allow their LTE communicators to interact more effectively with the cellular network. Users should expect this update to go through sometime later this month. We do not have an exact date as to when the update process will begin. If you have any questions about this update, please contact us at support@alarmgrid.com for more information.

Hi DIYers! It's time for another video update from Alarm Grid. This time we're covering the videos from May 30th and 31st. We have six new videos this time. Joe has four, while Jorge and Jarrett each have one. The Alarm Grid boys are back to help you learn your system. Let's check them out.

Connecting an LTE-XV to a VISTA-21iP

The ever-friendly Joe teaches you how to connect a Honeywell LTE-XV to a Resideo VISTA-21iP Security System. The Honeywell LTE-XV is a Verizon LTE Communicator for VISTA Series Systems. It follows the same setup process as the Honeywell LTE-XA, which is the AT&T LTE Communicator. Please note that by adding an LTE-XV or LTE-XA to a VISTA-21iP, you will disable the integrated IP communicator for the system. If you want to use an external dual-path communicator with a VISTA-21iP, you should add a Honeywell LTE-IV instead.

The ADC-V522IR Audio Features

Joe explains the two-way audio capabilities of the Alarm.com ADC-V522IR Security Camera. If you use this camera with the Qolsys IQ Panel 2 Plus, you can livestream the audio and video directly from the panel. You can also get live audio and video from the Alarm.com Mobile App. This app can be conveniently accessed right from your Android or iOS device. You can even speak through your Android or iOS device and have your voice come through the camera. This will allow you to have a live two-way conversation with whoever is at the other end.

Connecting the August Smart Lock Pro to WIFI

Joe helps you connect your August Smart Lock Pro to a WIFI network. To do this, you will need an August Connect WIFI Bridge. Getting your August Smart Lock Pro connected with WIFI is recommended if you want to use the device with Apple HomeKit. However, it is not required. The only other way to use HomeKit with the August Smart Lock Pro is to have your HomeKit Hub within Bluetooth range (10 to 15 feet) of the lock. Your HomeKit Hub can be an iPad, HomePod or AppleTV (4th Generation or higher).

Arm Stay vs. Arm Instant

Fan-favorite Jarrett explains the differences between Arm Stay and Arm Instant. The major difference is that Arm Instant ignores all Entry Delay settings. This means that any Entry/Exit Zones will effectively operate as Perimeter Zones. If you fault an Entry/Exit Zone while the system is Armed Instant, then an immediate alarm will occur. If you want to Disarm the System while it is Armed Instant, you will need to do so without activating an Entry/Exit Zone. We recommend using a Security Key Fob or an interactive service platform like Alarm.com or Total Connect 2.0.

Response Types Supported by the SiXPIR

Jorge discusses the Response Types that can be used with the Honeywell SiXPIR Motion Detecting Sensor. The only available Device Type for a SiXPIR Zone is "Motion Sensor". This restricts the Response Types that can be used. You cannot set the Device Type to "Other" to gain access to the full list of Response Types. As a result, the only Response Types you can use with the SiXPIR are Interior Follower, Perimeter, Day/Night, Interior With Delay, Resident Monitor, Resident Response, General Monitor, and General Response.

Using the August Smart Lock Pro with Apple HomeKit

Joe talks about using the August Smart Lock Pro with Apple HomeKit. By including the August Smart Lock Pro with your Apple HomeKit network, you can operate the lock from anywhere using your iOS device. There are two ways to use the lock with HomeKit. The first is to pair the August Smart Lock Pro with the August Connect WIFI Bridge. This will allow the lock to connect with a WIFI network so that you can access it remotely. The other option is to have the lock within Bluetooth range of your HomeKit Hub. This can be an AppleTV (4th Generation or higher), iPad or HomePod.

Hi DIYers! We are happy to announce that we are offering a sale on the iGSMV4G and the iGSMV4G-TC2 effective immediately. The iGSMV4G can be purchased for $50. The iGSMV4G-TC2 is available for $60. These are AT&T 4G Cellular Communicators that allow VISTA Panels to connect with AlarmNet360.

Earlier this year, AT&T announced the sunset of their 3G and 4G networks. By February 2022, it will no longer be possible to use an AT&T 3G/4G with your alarm system. You must upgrade to an LTE communicator by then. Additionally, AlarmNet will no longer allow activations for AT&T 3G Communicators and AT&T 4G Communicators starting Wednesday June 26th, 2019.

We still have some iGSMV4G and iGSMV4G-TC2 products in stock. We want to get rid of them before they become unusable. This is a perfect opportunity to get your Resideo VISTA System online for a very low price. With these communicators, you can access Total Connect 2.0 and use all of the available features. Please note that you will need a Gold Plan or higher to activate a cellular communicator with Alarm Grid. Also, we cannot offer overnight orders for these products.

If you do get one of these communicators, you must activate the module before June 26th. After that date, it will be impossible to activate the cellular portion of the communicator. Additionally, if you deactivate the communicator or discontinue service for any reason, you will not be able to reactivate this unit for cellular service after June 26th. You will still be able to use the communicator for Internet Communication only after this date.

Resideo has stated that more recently manufactured modules will be able to be activated for up to 180 days after June 26th. However, we cannot guarantee that a new iGSMV4G will be able to be activated after that date. For your own planning, you should not expect an AT&T 3G or 4G communicator to be activated after June 26th.

The Honeywell iGSMV4G is a dual-path AlarmNet Communicator for Resideo VISTA Series Systems. It uses AT&T 4G and hardwired ethernet to connect with the AlarmNet Servers and provide access to Total Connect 2.0. This module will provide fast and reliable connectivity until February 2022. The cellular portion of the module will no longer work after February 2022. At that time, you will want to upgrade to a newer LTE communicator. We are offering the iGSMV4G for $50.

The Honeywell iGSMV4G-TC2 is a bundled kit that includes the iGSMV4G module, as well as the necessary PROM Chip upgrades for the VISTA-15P and VISTA-20P Alarm Systems. You should purchase this kit if your 15P or 20P System is running a firmware version of at least 2.0, but less than 9.12. Any 15P or 20P system running less than version 9.12 will not be able to be used with Total Connect 2.0. We are offering this kit for $60.

If you aren't sure what firmware version your system is running, you can check the current PROM Chip. This is a small black chip located in the middle of the system. This FAQ can teach you how to replace an old PROM Chip if needed.

Here is an example of a PROM Chip for a VISTA-20PSIA System. This is basically a VISTA-20P System with some added features put in place to prevent false alarms. Note that this system is running v10.23, which is high enough to use TC2.

If you want to future-proof your VISTA System with an LTE communicator, then we can certainly help you with that as well. We currently offer the Honeywell LTE-XA (AT&T LTE), the Honeywell LTE-XV (Verizon LTE) and the Honeywell LTE-IV (dual-path Verizon LTE and IP ethernet). All of these communicators will extend the life of your VISTA System well into the very distant future.

Keep in mind that a VISTA-15P or VISTA-20P System will need to be running at least firmware version 9.12 to support Total Connect 2.0. A VISTA-21iP must be running at least version 3.13 to support TC2. We offer PROM Chip upgrades for VISTA-21iP Systems here. We do not offer bundled kits for VISTA-21iP PROM Chips. The PROM Chips included in the iGSMV4G-TC2 Kit are for 15P and 20P Systems only.

Remember, we cannot offer overnight orders for either the iGSMV4G or the iGSMV4G-TC2. You must activate these communicators before June 26th. They can remain active until February 2022. After that, you must upgrade to an LTE communicator or use IP only communication. If you have any questions about this sale or these communicators, please contact us at support@alarmgrid.com. We look forward to hearing from you.

Hi DIYers! We would like to inform you that Software Update 2.3.3 is now available for the Qolsys IQ Panel 2 Plus and original IQ Panel 2. This update does not add any new features, but it does include some useful system improvements and general fixes. The update can be easily applied.

Software Update 2.3.3 really only applies useful improvements for the IQ Panel 2 Plus. However, original IQ Panel 2 owners can still perform the update to get their systems on the latest version. This update is very important for helping our technicians provide the best possible support for IQ Panel 2 Plus owners.

The following general improvements are included in Software Update 2.3.3:

• Can now obtain the Long Sensor ID for the PowerG board and report it to Alarm.com
• Can now obtain the Device Firmware Version for any auto-learned PowerG Sensor enrolled after updating to 2.3.3 and report it to Alarm.com.
• Can now send Alarm.com the Radio Firmware Version and Modem Firmware Version for the PowerG board.

To perform the update, your system must be running at least 2.0.1, be connected to a local WIFI network, have its power transformer plugged-in, and have a charged battery. Once you have met the requirements, start from the main system screen. Press the small grey bar at the top. Choose Settings > Advanced Settings > enter the Installer Code (default 1111) > Upgrade Software > Patch Tag > enter iqpanel2.3.3 > OK > Upgrade Using Network > OK.

It will take about five (5) minutes for the update to download. The panel should reboot to the home screen when complete. If you have any questions about this update, do not hesitate to email us at support@alarmgrid.com, or call us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F.

Hi DIYers! We recently learned that the Sonos Speaker integration for Alarm.com is now available. This allows users to control their Sonos Speakers and include music into scenes alongside other smart home devices. It is now easier than ever to create the perfect ambiance for your home.

There are many fantastic features available through the Alarm.com Sonos Speaker integration. You can play audio from a variety of different sources, including Spotify, iTunes, SoundCloud and more. It's also super convenient to control the audio feedback right from Alarm.com. Users can play/pause, adjust the volume, mute/un-mute and more. You can even choose to play music on all speakers or select a particular set.

But the most exciting part of this integration is the ability to include the speakers into smart scenes. This way you can have Alarm.com activate your Sonos Speakers based on a set schedule or with certain system events. For instance, you might have your music turn on as soon as you get home and Disarm your system. Or you could have your music activate when you open up a door. You can even have it activate with other devices like your lights and your smart thermostat.

In order to use the ADC Sonos Integration, you will need either an iOS device running Firmware Version 8.0 or higher or an Android device running Firmware Version 2.1 or higher. You will also need:

• Alarm.com Mobile App Version 4.10.4 or higher
• The latest version of the Sonos Mobile App and Speaker Software
• The Alarm.com Audio Integration Service Package provided from your monitoring company
• The Sonos Speakers must be connected to the internet on the same network as your iOS or Android device for initial pairing.

To get started with the Sonos integration, you should contact your monitoring company and ask them to activate the Alarm.com Audio Integration Service Package on your account. Alarm Grid customers can do this by sending an email to support@alarmgrid.com. You can complete the rest of the process from Alarm.com.

Login to your Alarm.com account on the mobile app. Press the hamburger button (three horizontal bars), followed by Audio. Select "Sonos" from the dropdown menu. Then press Start, followed by Continue. You will then need to login to your Sonos account and give Alarm.com permission to control your Sonos System. After you complete the process, you will see an Audio option in the main menu of your Alarm.com account through the mobile app. This will allow you to conveniently play audio.

If you have any questions about the Alarm.com Sonos integration, please email us, or call us at (888) 818-7728 during our business hours of 9am to 8pm EST M-F. We look forward to hearing from you.

Alarm Grid has learned of technical difficulties between certain PowerG Sensors and the Qolsys IQ Panel 2 Plus. These issues affect the PG9914 Wireless Motion Sensor and the PG9933 Wireless Carbon Monoxide Sensor when used on an IQ2+ System running PowerG Version 80.17.

Due to this issue, any DSC PowerG PG9914 Wireless Motion Sensor manufactured before August 23, 2018 will not work with a Qolsys IQ Panel 2 Plus running PowerG Firmware Version 80.17. This includes any PG9914 running firmware V3.0.5 or V3.0.7. Also, if the first four (4) digits of the Serial Number are less than "3618", then the device is affected.

Below are some pictures of a PG9914 that will not work with an IQ Panel 2 Plus running PowerG Version 80.17:

Additionally, any DSC PowerG PG9933 Carbon Monoxide Sensor manufactured before March 26, 2019 will not work with a Qolsys IQ Panel 2 Plus running PowerG Firmware Version 80.17. Any PG9933 manufactured after this date will include a sticker indicating compatibility with the IQ Panel 2 Plus.

If you want to check the PowerG Firmware for your IQ Panel 2 Plus, you can do so from the panel. Start from the main screen. Press the small grey bar at the top. Choose Settings > Advanced Settings > enter the Installer Code (default 1111) > About > PowerG. You should check the Radio Firmware Version.

If you have any questions about these incompatibilities, please reach out to us. The best way to contact us is by emailing support@alarmgrid.com. We will check your email at our earliest convenience and respond back as soon as possible. We look forward to hearing from you.

Hi DIYers! We hope that you had a safe and fun Memorial Day weekend. Our video team managed to produce eight (8) new videos last week. Joe was featured in five (5) new videos, mostly covering the August Smart Lock Pro. Jorge and Jarrett both had a video apiece, and I made one as well.

Connecting an August Smart Lock Pro with the August Home App

Joe explains how to connect your August Smart Lock Pro with the August Home App. This is one of the first things you will do with the August Smart Lock Pro. The August Home App allows you to operate your lock from your smartphone. You can control the lock through Bluetooth if you are within 10 to 15 feet. You can also operate the lock remotely from almost anywhere if you have the August Connect WIFI Bridge.

Including the August Smart Lock Pro

Joe shows users how to include the August Smart Lock Pro with a Z-Wave network. This is important if you want to control the August Smart Lock Pro from an interactive service platform from Total Connect 2.0 or Alarm.com. The pairing process is completed through the August Home App. You will need to have the lock paired with the app before you can pair it with a Z-Wave network. You will also need access to your Z-Wave hub or controller.

Defaulting the August Smart Lock Pro

Joe teaches users how to perform a factory default for an August Smart Lock Pro. To perform a factory reset, you will need to access your August account through the August Home App. Doing this will clear any Z-Wave and WIFI settings for the lock. You will need to reprogram the lock from scratch using the app. You should only perform a factory reset if you plan on giving away the lock or as a final troubleshooting step.

Excluding the August Smart Lock Pro

Joe covers the process for excluding the August Smart Lock Pro from a Z-Wave network. Unlike most Z-Wave devices, you don't need to clear the August Smart Lock Pro before adding it to a Z-Wave network. Instead, you will only do this if you are clearing the device from the network so that you can add it to a new one. You can complete the exclusion process through the August Home App. If you don't have access to your Z-Wave hub, you will need to perform a Z-Wave factory reset.

Getting an Alarm or Zone Open or Close to Activate a Honeywell IP Camera

Joe talks about how you can create notifications to have your Resideo IP Cameras activate when sensors are faulted or during alarm events. Normally, these cameras will only activate when they detect motion or sound. You can create these notifications through Total Connect 2.0. It is also possible to set specific hours when a camera can initiate a recording. This way, even if a zone is faulted, the camera will only capture clips during certain predetermined hours.

Temperature Sensor Notifications from a Lyric via Apple HomeKit

Jorge explains how you cannot receive temperature sensor notifications from Apple HomeKit when used with a Resideo Lyric Alarm System. HomeKit will only provide specific alerts for intrusion zones on the Lyric. For all other zones, only a General Lyric System Alert will be displayed. This makes it impossible to determine exactly which zone was faulted. However, you can still use HomeKit alongside Total Connect 2.0. The TC2 service will provide specific alerts for any faulted zone.

Is AlarmGrid Compliant with Nationally Recognized Industry Standards?

In a very rare video appearance, I talk about how Alarm Grid is compliant with Nationally Recognized Industry Standards. Nearly all of the systems and sensors that we sell are certified by Nationally Recognized Testing Laboratories. Additionally, our central monitoring partner Criticom Monitoring Services is UL Listed and FM Approved. While we may occasionally have equipment on our site that is still in the process of being approved by a NRTL, we stand behind our manufacturers and are confident in their offerings.

Finding the Firmware Revision on a Lynx Touch

Coming through with a video at the very last minute, Jarrett teaches users how to find the Firmware Revision on a Resideo Lynx Touch System. If you want to perform a firmware update for these systems, then you will need the LYNXTOUCH-MSD Updater Tool. It is no longer possible to push an update over-the-air (OTA). Getting these systems on the latest firmware is important if you plan to use an LTE cellular communicator. Please note that you will also need an alarm monitoring plan that includes cellular connectivity.

Alarm Grid will be closed Monday May 27, 2019 in observation of Memorial Day. We will not be answering our phones or responding to any emails during this time. Our entire office will resume normal operations Tuesday May 28, 2019. We apologize for any inconvenience that this may cause.

If you need to reach us during this time, you should email support@alarmgrid.com. We will check your email on Tuesday and respond as quickly as possible. You may also reach us at (888) 818-7728 during our normal business hours of 9am to 8pm EST.

Alarm Grid would like to pay special respect to those who have made immense sacrifices in defending and protecting our country. We thank everyone who has worked hard to keep us safe. No matter how you spend this Memorial Day, we hope that you stay safe and enjoy the company of some good family and friends. Our team looks forward to returning to work tomorrow.