Product Announcements Posts

Hi DIYers! We have exciting news today, as the Honeywell LTE-IA for VISTA Series Panels is now available! This has been eagerly anticipated by VISTA users with strong service from the AT&T LTE Network. We are sure that many of you will want to take advantage of this great new communicator!

As a dual-path communicator, the Honeywell LTE-IA can send signals thorough both a local IP network and a cellular network. It uses a hardwired ethernet connection for IP service, and it works across the AT&T LTE Network for cellular service. The communicator will use IP as its primary path, and cellular will serve as the backup.

Being able to connect with the AT&T LTE Network is the best feature of this communicator. AT&T has stated that they will support their LTE network well into the very distant future. The network will remain in-service even as newer networks like 5G are made available many years from now. AT&T invested huge amounts of money into their LTE infrastructure. Their LTE network is not going anywhere anytime soon. The result is that this communicator will keep your VISTA Panel monitored in the long-run.

The importance of reliable cellular backup cannot be stressed enough. Internet outages, and it is highly likely that your system will need to rely on its cellular connection at some point or another. As long as the cellular path is still available, your VISTA System will remain connected with the AlarmNet360 Servers. This means that you will still be able to take advantage of all the great features from Total Connect 2.0.

Speaking of Total Connect 2.0, a proper AlarmNet Communicator like the Honeywell LTE-IA is required if you want to use this service. If you didn't know, TC2 is an interactive monitoring and automation platform that you can access from anywhere. This is possible using the Total Connect 2.0 Mobile App on Android and iOS devices.

By accessing TC2, you can arm and disarm your system, check its status, control Z-Wave devices (Tuxedo Touch or VAM required), view TC2 Cameras (video plan needed), and more. All you need is a compatible Honeywell System with an AlarmNet Communicator, and an appropriate alarm monitoring plan.

For the VISTA P-Series Panels, the VISTA 15P, VISTA 20P, and VISTA 21iP can all support TC2. There are just some firmware requirements you need to keep in mind. A 15P or 20P must be running firmware 9.12 or higher. A 21iP must be running firmware 3.13 or higher. If you aren't sure of the firmware, just check the PROM Chip. This is a small black chip on the panel's main board. It will have a code that begins with the letters "WA". This code will tell you the firmware version.

If you find that the PROM Chip is not high enough, don't worry! We sell new 15P PROM Chips, 20P PROM Chips, and 21iP PROM Chips. Just be aware that a 15P or 20P System will need to be at least firmware 2.0 or higher to receive a PROM Chip upgrade. Any VISTA 21iP can receive a PROM Chip upgrade.

To replace the PROM Chip, start by powering down the panel by disconnecting the backup battery and unplugging the transformer. Carefully pry off the old PROM Chip with the metal end of a binder clip. Then apply the new one by putting it in the same place and pressing it down until it clicks. Just be careful not to bend the metal prongs on the new PROM Chip! You can then power up your system by plugging the transformer back in and reconnecting the backup battery.

If you actually have better service from the Verizon LTE Network than the AT&T LTE Network, you should also know that a similar Verizon LTE Dual-Path Communicator called the Honeywell LTE-IV has been available for quite some time. Remember, the service provider for your alarm system has nothing to do with the service provider for your phone. Just go with whichever service works best in your area, regardless of which service you use for your smartphone.

If you have any questions about the Honeywell LTE-IA, please reach out to us. The best way to contact us is to email support@alarmgrid.com. Another option is to call us during our normal business hours of 9am to 8pm EST M-F at (888) 818-7728. We look forward to hearing from you!

Hi DIYers! We are pleased to announce that the Interlogix Simon XTi-5i is now available for purchase from the Alarm Grid website. This is a capable wireless panel, all available at an affordable price. It is perfect for homes and small businesses looking for an effective security solution.

Although the Simon XTi-5i is considered a "budget" alarm system, it still offers the same great performance you would expect out of any modern alarm system. The system is essentially an upgrade over the current Simon XTi-5, but it has been revamped to enhance the end user experience. The 5" full-color touchscreen has been improved from the older models, and it feels more satisfying to control. We tested the touchscreen at ISC West 2019, and we gotta say, it's a major improvement.

New to the Simon XTi-5i is the ability to adjust the user interface (UI). You can have the color schemes for the system menus match those from Alarm.com. You will get the same great orange and white color scheme for the Simon XTi-5i as what you have on Alarm.com. This should help you feel more comfortable, whether you are controlling your system from the panel or from the Alarm.com Mobile App on Android and iOS devices. By using the mobile app, you can access your system from almost anywhere!

In order to access Alarm.com, you will need an Alarm.com Communicator. Both LTE cellular and dual-path options are available. Getting your Simon XTi-5i connected with Alarm.com will provide you with the most reliable alarm monitoring service possible. You will also be able to access Alarm.com through the mobile app to control your system in a variety of ways. This includes arming and disarming, checking system status, controlling Z-Wave devices, viewing Alarm.com Cameras, and more. Please note that you will need a Self Gold Plan or higher from Alarm Grid to access Alarm.com, and a Self Platinum level plan or higher is required for remote viewing of Alarm.com cameras. More information can be found on our alarm monitoring page.

The Simon XTi-5i will actually support the same communicators as all of the previous Simon Panels. We recommend using one of the following communicators:

• Alarm.com XT-511-US-AT (AT&T LTE)
• Alarm.com XT-511-US-VZ (Verizon LTE)
• Alarm.com XT-511-CA-TL (Telus LTE - Canada Only)
• Alarm.com XT-511-US-DP-AT (AT&T LTE & IP)
• Alarm.com XT-511-US-DP-VZ (Verizon LTE & IP)
• Interlogix 600-1048-XT-LTE-AT (AT&T LTE) (Must be FW 191C or higher)
• Interlogix 600-1048-XT-LTE-VZ (Verizon LTE) (Must be FW 191C or higher)
• Interlogix 600-1048-XT-LTE-TL (Telus LTE - Canada Only) (Must be FW 191C or higher)

Each of these communicators also doubles as a perfectly functional Z-Wave controller. This will allow you to start building a complete smart home network of Z-Wave devices. You can create scenes to have your Z-Wave devices activate automatically with certain system events or on a set schedule. This can definitely help you save money on energy costs and make your life more convenient. There are all sorts of Z-Wave devices you can add, including lights, locks, thermostats, water valves, and more!

In addition to a better touchscreen and revamped menus, the Interlogix Simon XTi-5i also packs some more power under the cover. The zone count has doubled up to 80 wireless zones. This is perfect for virtually any home or any small to medium sized business. You can even use two (2) hardwired Normally Closed (NC) contacts with the system and connect them to the main board. Just be aware that these hardwired contact sensors will still cut into the maximum 80 zone limit.

As far as sensor support goes, the Simon XTi-5i facilitates the same great 319.5 MHz sensors that its predecessors supported. This includes the wireless sensors from Interlogix and Qolsys. You can also use the Qolsys S-Line Sensors with the system, though they will not utilize encryption with the Simon XTi-5i. If you want encrypted sensors for the system, you will have to wait for the exclusive lineup of Interlogix Encrypted Sensors, which should be made available soon. It is unknown which form of encryption these sensors will utilize, but it is expected that they will work exclusively with the Interlogix Simon XTi-5i System.

You can now purchase the Interlogix Simon XTi-5i from Alarm Grid! If you have any questions about this exciting new system, please reach out to us! The best way to contact us is to email support@alarmgrid.com. We will check your email at our earliest convenience and respond back as soon as possible. If you prefer to call us, you can reach us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F. We look forward to hearing from you and telling you all about this great new panel!

Hi DIYers! Are you still looking for the perfect smart lock? We have some brand-new options available with the Yale YRL236 and Yale YRL256. Both options utilize Z-Wave Plus connectivity and make great additions to your growing smart home network. They are perfect for use with TC2 and ADC.

When it comes to choosing a Z-Wave Plus Smart Lock, you want to make sure that the device you choose is easy to use and does its job of keeping your home safe. With a proven company like Yale from Assa Abbloy, you can rely on these smart locks with complete and total confidence. It has never been this easy to protect your home.

The Assure Lever Locks from Yale feature aesthetically pleasing designs that fit-in nicely with any home decor. Both the YRL236 and YRL256 models come in three (3) different finish options. These are Polished Brass, Satin Nickel, and Oil Rubbed Bronze. We know that the stylish consumer will find the design that matches their home the best. After all, we know that appearance matters too.

There is one major difference between the YRL236 and YRL256 models. The YRL236 includes a more traditional acrylic push-button keypad, while the YRL256 uses an electronic touchscreen. The acrylic keys of the YRL236 are durable and specifically designed to not wear-off with repeated use. The touchscreen keypad of the YRL256 is state-of-the-art and perfect for users who want a more advanced experience.

Whether you choose the tried and true push-button keypad of the YRL236 or the futuristic touchscreen keypad of the YRL256, you can be sure that you are getting an exceptional smart device. Both options feature back-lighting, which means that you will have no trouble using your door lock at night when it's dark outside. Other built-in features include auto re-locking, privacy mode, and tamper alarms.

The YRL236 and YRL256 both pair nicely with any Z-Wave controller. We recommend using a Z-Wave Plus controller for optimal wireless range and battery life. Both of these Yale Smart Locks are excellent devices for your smart home. You can get both the YRL236 and the YRL256, plus many other smart home devices, right from the Alarm Grid website. We also encourage you to check out our alarm monitoring page so that you can learn more about accessing Total Connect 2.0 and Alarm.com.

If you have any questions about the YRL236, the YRL256, or any of our smart home products, please reach out to us. The best and most efficient way to ask us questions is to email support@alarmgrid.com. You may also call us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F. We look forward to answering all your smart home questions!

Hi DIYers! We are thrilled to announce that the 2GIG GC3e is now available for purchase from Alarm Grid. Just a couple weeks ago we blogged about the new 2GIG GC2e System. Well now the other new wireless encrypted system from 2GIG is available as well. This is truly an exciting day!

The 2GIG GC3e Wireless Encrypted Security System is an upgrade over the existing 2GIG GC3 System in virtually every conceivable aspect. If you are already used to the original GC3, then you will have no problem transitioning to the GC3e. The system features a similar design, and it provides a familiar layout and user interface (UI) to help new users feel comfortable. But with its refreshed look, the GC3e fits in even better with most decor. End users are sure to love the sleeker design of this advanced new panel. Plus the 7" capacitive touchscreen looks absolutely beautiful. You can even set up a slideshow feature so that you and your guests can enjoy some pleasant pictures!

Of course, the GC3e is more than just a pretty face. It also provides support for the upcoming 2GIG Encrypted Sensors. Along with the GC2e, this panel will be the first-ever release from 2GIG with support for these devices. Wireless encryption is huge, as it makes these sensors virtually impossible for others to hack or takeover. This is crucial for anyone who wants to achieve the highest level of security possible for their home or business. Although the 2GIG Encrypted Sensor Lineup is still in development, you can currently use the existing 2GIG 345 MHz Sensors and the Honeywell 5800 Series Sensors with the GC3e. That's right, the system is backwards compatible! Up to 100 wireless zones can be added to the 2GIG GC3e.

The 2GIG Smart Areas feature has also returned for the GC3e. This allows users to set up four (4) distinct partitions. If you aren't familiar with partitioning, it refers to the ability to section-off an alarm system into multiple sections. You can control each section individually, without having to bypass a large number of zones. For example, you might arm one partition, while leaving the rest of the system disabled so that people can continue to move throughout those areas. 2GIG refers to these partitions as "Smart Areas", and each one can have its own access codes and zones. This feature is perfect for use in offices, multi-family homes, guest homes, and rental properties. And don't worry, you can still bypass individual zones within each partition when needed.

Z-Wave Plus functionality comes built right into the 2GIG GC3e. Its 500-Series Chipset lets you take full advantage of all of the great features that come with Z-Wave Plus. This includes extended wireless range and enhanced battery life with Z-Wave Plus devices. You can still use classic Z-Wave devices with the system as well. Just keep in mind that you will need to use Z-Wave Plus peripherals if you want maximum battery life and range. And by getting the system connected with Alarm.com, you will be able to control your smart home devices remotely from your Android or iOS device. You can also create smart scenes to have your Z-Wave devices activate automatically based on a schedule or with certain system events.

In order to access Alarm.com and receive alarm monitoring service, you will need two things. The first is an Alarm.com Cellular Communicator. You can choose from an AT&T LTE Communicator (coming soon!) and a Verizon LTE Communicator (available now). These modules are super easy to install, and they will provide your GC3e with the most reliable monitoring service available. Making things even better is that the system already comes with a built-in WIFI card. Once you add a cellular communicator, the GC3e will become dual-path ready. All you will need then is a monitoring plan. You will need a Gold or Platinum Level Plan from Alarm Grid to unlock the system's full potential. More information can be found on our alarm monitoring page.

In addition to its 100 wireless zones, the 2GIG GC3e supports two (2) on-board wired zones, up to 32 keyfob devices, up to eight (8) keypads (choose from 2GIG SP1, 2GIG SP2, and 2GIG PAD1-345), and up to 100 unique user codes. The GC3e receives power from a 1.7A 14VDC transformer that comes included. However, you will still need to provide your own wiring. We recommend using a Honeywell LT-Cable. Firmware updates for the GC3e can be pushed down over-the-air (OTA) from Alarm.com or applied locally using a USB drive.

If you have any questions about the 2GIG GC3e, you can always email us at support@alarmgrid.com. We will check your email at our earliest convenience and reply back as soon as possible. We look forward to hearing from you and helping you find the perfect alarm system for your home or business!

Hi DIYers! A few months ago, we blogged about the upcoming encrypted systems from 2GIG. Well the first one is here, as you can now buy the 2GIG GC2e Wireless Encrypted Security System from the Alarm Grid website! We are certainly very excited about this new panel, and we're sure you are too.

The 2GIG GC2e is essentially an upgraded version of the older 2GIG Go!Control GC2. The original GC2 has served as an effective and reliable alarm system for many years, and users who are just now getting into the market now have a great new option available to them. The GC2e offers a user interface (UI) and overall design that original GC2 users will be familiar and comfortable with. This makes it super easy to transition over to the new GC2e System for your home or business.

The main highlight of the GC2e is the ability to support the upcoming lineup for encrypted sensors from 2GIG. These will be the first-ever encrypted wireless sensors from 2GIG, and users will appreciate the added protection that these devices provide. Encrypted sensors are virtually impossible to defeat or takeover wirelessly. This is very important in a world where savvy intruders are able to use advanced technology to hack and take control of non-encrypted sensors.

With a GC2e System and encrypted sensors, you can put these concerns to rest. Please note that the 2GIG Encrypted Sensors are not yet available for purchase. However, we expect them to be available very soon. In the meantime, you can still use the GC2e System with the existing 2GIG 345 MHz Sensors and the Honeywell 5800 Sensors. The GC2e is backwards compatible to support these devices. Just be aware that the system will only utilize encryption when it is paired with the upcoming encrypted 2GIG Sensors.

But the GC2e offers more upgrades than just support for encrypted sensors. It features an updated design that looks cleaner and more modern than the original GC2 System. Users will also appreciate the larger touchscreen, which now measures 5" across. By retaining the existing UI, existing GC2 users will know exactly what they start using the GC2e. If you ever owned the GC2 System in the past and are now looking to get back into the market, then the GC2e is a great choice.

The system also has some internal upgrades as well. The system now supports Z-Wave Plus technology with its 500-Series Chipset. This means that all Z-Wave Plus devices paired with the system will be able to utilize their maximum wireless range and battery life. You can also use classic Z-Wave devices with the system without issue. Just remember that you will only get the extended range and increased battery life with Z-Wave Plus devices.

Anyone who purchases the GC2e will want to make sure they get an Alarm.com Cellular Communicator for the system as well. This will provide the system with fast and reliable connectivity across a cellular network. The GC2e System actually supports the same existing cellular communicators used with the older GC2 System. We strongly recommend choosing an LTE cellular communicator for the system. Cellular service providers have stated that they plan to support their LTE networks well into the very distant future. With an LTE communicator, you can keep your GC2e monitored for many years to come.

We recommend using one of the following cellular communicators with the GC2e:

• 2GIG LTEA-A-GC2 (AT&T LTE)
• 2GIG LTEV1-A-GC2 (Verizon LTE)

A cellular communicator is also necessary for getting the system connected with Alarm.com. This is an interactive monitoring and automation platform that you can access from a web browser or remotely using the Alarm.com Mobile App. The service will allow you to arm and disarm your system, check current system status, and control your Z-Wave smart home devices from virtually anywhere in the world. Please be aware that you will also need a Gold or Platinum Level Plan from Alarm Grid to access ADC. More information can be found here.

As far as some basic specifications go, the system offers support for up to 60 wireless zones, a single hardwired zone, eight (8) remote control keyfobs, a total of four (4) keypads (2GIG TS1 and/or 2GIG PAD1-345), a wired siren output, and up to 64 user codes. The system is powered using a 1.7A 14VDC transformer that comes included. No wiring is included to connect the transformer to the panel. But you can get a Honeywell LT-Cable for this task. The system receives firmware updates over-the-air (OTA) from Alarm.com, or you can apply updates locally using a compatible updater tool.

We also know that many customers are eagerly awaiting the release of the 2GIG GC3e as well. This will be the successor to the current 2GIG GC3, and it will also provide support for the upcoming encrypted sensor lineup. Unfortunately, the 2GIG GC3e is not yet available for purchase. But we believe that it will be arriving before the end of summer. So please keep checking out blog for further updates.

If you have any questions about the 2GIG GC2e, you can send an email to support@alarmgrid.com. We will check your email at our earliest convenience and reply back as soon as possible. We look forward to hearing from you and answering all your questions about this exciting new system!

Hi DIYers! We are happy to announce that we have some new long-range motion sensor options available on our website. These long-range motions are good for long, narrow areas such as hallways. You now have more options in choosing the perfect motion sensor for your home or business.

The first new product we would like to discuss may seem relatively minor, but it actually opens up a whole new world of possibilities for motion detection. We are now pleased to offer the Optex FL-60N Long-Range Lens. This convenient device replaces the stock lens for an Optex WNX-40 Series Motion Sensor. Once the lens is added, the motion sensor will enjoy a long-range coverage area of 60 feet by 6 feet. It's very easy to swap out the old lens, and the process can be completed by any DIY user.

Alarm Grid offers four (4) different Optex WNX-40 Series Motion Detectors. We have an option available for nearly every wireless alarm panel that we carry. If you don't have one of these sensors yet, make sure you choose the correct model when purchasing. You need to make sure that the frequency the sensor uses for wireless communication is compatible with your security system.

The following motion sensors from our website are compatible with the Optex FL-60N:

• Optex WNX-402G (433 MHz for 2GIG Systems)
• Optex WNX-40DS (345 MHz for DSC Systems)
• Optex WNX-40HW (345 MHz for Honeywell Systems)
• Optex WNX-40IX (319.5 MHz for Interlogix Systems)

In addition to the Optex FL-60N Long-Range Lens, we now offer the complete Honeywell DT900-Series lineup of hardwired, long-range DUAL TEC motion sensors. Before, we only offered the Honeywell DT906. Now we offer the DT900, DT901, and DT907 long-range motion sensors as well. These are all hardwired motion sensors that connect directly with a hardwired alarm panel or a compatible wired to wireless converter. The motion sensor use these wired connections for both power and data transmissions.

If you're wondering how these four DT900-Series motion sensors differ, it is actually quite simple. Both the DT906 and the DT907 have the same selectable detection ranges. You can choose between a coverage area of 200 feet by 15 feet, or 120 feet by 10 feet. However, only the DT906 has an anti-masking feature. The DT907 does not. Meanwhile, with the DT900 and the DT901, you can choose between a coverage area of either 90 feet by 70 feet, or 50 feet by 40 feet. But in this case, the DT900 has anti-masking, while the DT901 lacks this feature. Other than that, these are mostly the same sensors.

If you have any questions about these new long-range motion sensor options, or if you want to find out if a long-range motion sensor is right for you, please reach out to us. The best way to contact us is to email support@alarmgrid.com. Our team will check your email as soon as possible and reply back as soon as we can. We look forward to hearing from you and helping you find the perfect motion sensor for your needs.

Hi DIYers! We are here to announce today that we have some new products available on our site. Our new offerings include the DSC Iotega Alarm System, several new Z-Wave Plus in-wall light switches, and even some hand tools that you can use to install your security system and sensors!

First we will talk about the DSC Iotega System. The Iotega is one of the newest alarm systems from DSC. This is one of the few systems on the market with Apple HomeKit support. It is the only system that can support both HomeKit and PowerG Sensors. These wireless sensors are great, as they offer an astounding range of up to 2km in open air (4km with wireless repeater) and 128-bit AES encryption for added wireless protection.

Alarm Grid already sells the Qolsys IQ Panel 2 Plus with PowerG support, which is one of our most favorite systems. We also sell the HomeKit-ready Resideo Lyric Alarm System, an exceptional system in its own right. But if you want to use both PowerG Sensors and Apple HomeKit, then you are stuck with the DSC Iotega.

The Iotega has a major drawback in that it does not support local programming. This makes the panel a poor choice for DIY users, as they cannot complete their own programming. But if you need a HomeKit-compatible system with PowerG support, the Iotega fulfills that niche. The system is also compatible with the Alarm.com interactive platform for remote access, Z-Wave Plus control and more. Please note that cellular monitoring service is require to use Alarm.com.

In addition to the DSC Iotega With Built-In Verizon LTE Communicator, we also now sell an Iotega 3-1 System Kit (System w/ Three (3) Door and Window Contacts & One (1) Motion Sensor), an Iotega Touchscreen Keypad and a desk mount for the touchscreen keypad.

Next for our new product releases are a plethora of new in-wall Z-Wave Plus smart lighting switches from Go!Control and GE. These products are great for any homeowner who wants to take smart control over their lights for remote operation and smart scene functionality. Go!Control and GE both offer some fantastic smart lighting devices, and we are excited to add these products to our growing lineup.

Perhaps the smart lighting device we are most excited about is the Go!Control WT00Z5-1 Z-Wave 3-Way Smart Switch. This in-wall switch controls lighting loads already connected with a load-bearing switch or dimmer. The module can connect with up to five (5) load-bearing switches for 7-way operation. Fewer load-bearing devices can be used if that is all that is needed for the setup.

But what makes the Go!Control WT00Z5-1 unique is that it eliminates the need for a traveler wire. Instead, the module uses Z-Wave Plus technology to send all communication signals. All you need to do for setup is connect the 120VAC line and a neutral wire. This is great for DIY installers who may not feel comfortable running a traveler wire.

Other Z-Wave Plus devices now available from Alarm Grid include:

• Go!Control WD500Z5-1 Z-Wave Wall Dimmer Switch
• GoControl WS15Z5-1 Z-Wave Smart Light Switch
• Go!Control PS15EMZ5-1 Z-Wave Plug-in Appliance Module
• Go!Control PD300EMZ5-1 Z-Wave Plug-In, 300W Dimmer Module
• GE 28170 Z-Wave Plug-In Smart Dimmer
• GE 28172 Z-Wave Plug-In Smart Switch
• GE 14318 Z-Wave In-Wall Smart Switch
• GE 14294 Z-Wave In-Wall Smart Dimmer
• GE 14287 Z-Wave In-Wall Smart Fan Control
• GE 12723 Z-Wave In-Wall Add-On 3-Way Switch

Unfortunately, we don't have any pictures of the new Z-Wave Plus devices quite yet. But we hope to have them on the site in the near future.

Finally, we have a few hand tools that can help new users install their systems and sensors. These new offerings include the a wire stripper tool, a digital multimeter, a 6-in-1 screwdriver, and 13-piece screwdriver set. Not only are these tools great for setting up your system, they are also perfect for using around the house or around the shop in general. They are all high quality tools that make an excellent addition to any tool set.

• Jonard Wire Stripper Tool
• Pro'sKit Digital Multimeter
• Platinum Tools 6-in-1 Screwdriver
• Platinum Tools 13-Piece Mini Screwdriver Set

We hope that our new and existing customers can put these latest Alarm Grid products to good use. If you have any questions about these new products, please send an email to support@alarmgrid.com. We look forward to hearing from you and discussing these new products!

Hi DIYers! We are excited to announce that there has been a price reduction on the Honeywell SkyBell DBCAM Video Doorbells. You can now get a brand-new video doorbell for your home for just $100. These are excellent video doorbells that are compatible with the Total Connect 2.0 platform.

The SkyBell DBCAM captures video at up to 1080p quality. The device connects with your home's local WIFI network, and it has a built-in LED light to display current status. Whenever someone rings the doorbell or someone in front of your door sets off the integrated motion detector, you will receive a push alert right to your smartphone. This is great for knowing if your friend has arrived, if the pizza is here, or even if a package thief is trying to make off with your stuff!

If you are an Alarm Grid monitored customer with access to Total Connect 2.0, you can set up the DBCAM to send you alerts right through the TC2 platform. If you don't have service with Alarm Grid, you can still receive mobile alerts for the DBCAM through the SkyBell App. By connecting the device with your local WIFI network, you can get these alerts from anywhere. Whether you're in the backyard or across the planet, you will know exactly what is going on in front of your house!

Please note that this limited time offer is only for the "round" SkyBell DBCAM. Only the "silver" color is being included in this promotion. No other color variant is being offered at a discounted price. Additionally, the SkyBell DBCAM-TRIM and the Alarm.com SkyBell DBCAM are both NOT included in this promotion. Both of those products are still available at their usual prices. This promotion, while supplies last, is strictly for the silver-colored Honeywell SkyBell DBCAM for use with Total Connect 2.0.

Hurry now, and get a brand-new SkyBell DBCAM for your home before they're sold out! This promotion is only being offered while supplies last. If you have any questions, you can always email us at support@alarmgrid.com. We look forward to hearing from you!

Hi DIYers! We are pleased to announce that the ADC-T3000 Smart Thermostat is now available for purchase from the Alarm Grid website. This thermostat improves upon the older ADC-T2000 Thermostat with increased capabilities, a new slimmer design, and advanced features for end users.

End users looking for a state-of-the-art smart thermostat can receive great results from the Alarm.com ADC-T3000. This Z-Wave Plus Thermostat is designed for use with the Alarm.com platform. However, you can really use it with any Z-Wave smart home network. This includes Resideo Systems that use the Total Connect 2.0 platform. No matter how you control your smart home devices, you will love the performance of your new ADC-T3000.

There are many great features that make the ADC-T3000 a worthwhile upgrade. For one, this has more space for wiring than the previous model. Installers will also appreciate the improved access terminals that make it easier to wire the connections. It is also easier to understand what action the HVAC system is performing, as the ADC-T3000 will actively display the word "Heat" or "Cool" based on the current activity. The device measures 4.1"L x 5.0"W x 0.7"D, which is even slimmer and sleeker than the previous model. The device uses two (2) AAA batteries for backup power, and all the necessary mounting hardware comes included.

Additionally, Alarm.com has also expanded upon the list of their certified Z-Wave smart lighting devices. All of the lights listed below have been certified by Alarm.com, but not for "real-time" status. This means that they have been tested and will work well with Alarm.com, but they will still count against the 10 device limit for displaying status. For more information on the Alarm.com displayed lighting status limit, please review this FAQ.

• Jasco Enbrighten Smart LED Bulb A19 (39723)
• Jasco In-Wall Dimmer Toggle (14322, 14296)
• Jasco Dimmer Switch Toggle (14319, 14293)
• Leviton In-wall Switch (DZ15S)
• Leviton In-wall Dimmer (DZ6HD - 600W)
• Leviton Plug-in Outlet (DZPA1)
• Leviton Plug-in Dimmer (DZPD3)

Finally, Alarm.com has announced that the ADC-V622 Security Camera is now compatible with their Video Analytics feature. Video Analytics is an advanced feature that allows users to receive real time alerts (text and/or email) regarding unusual activity or movement, while ignoring routine movement. This is done using advanced AI software that is only available from Alarm.com. This technology can actively distinguish between people, vehicles and animals. It can also determine direction of movement and the duration of any captured activity.

If you have questions about any of these Alarm.com updates, please reach out to us by emailing support@alarmgrid.com. Remember that our support hours are from 9am to 8pm EST M-F. Keep this in mind if you decide to email us. We look forward to hearing from you.

Hi DIYers! We would like to inform you that the VERSA-2GIG Door and Window Contacts have received an update. These changes should not affect device compatibility or performance. However, they will effect the way these devices are enrolled with a panel and how maintenance is performed.

The VERSA-2GIG Contacts operate at 345 MHz. They are designed for use with 2GIG Systems (GC2 and GC3) and the Resideo Lyric Controller (Version MR3 or higher). These surface-mounted devices operate like any standard door and window contact sensor. Each unit includes a sensor and an accompanying magnet. The sensor is mounted on the door or window frame, while the magnet is mounted on the door or window itself. When the door or window is opened, the magnet will separate from the sensor and cause it to activate. The sensor will then alert the panel to let the system know that the door or window has been opened.

Alarm Grid recently learned that the VERSA-2GIG Door and Window Sensors have been updated. The new model enrolls using Loop 1 and has a convenient slide-off cover. Additionally, a tab on the side of the device indicates which side should be facing the accompanying magnet. This is a change from the older style. The old model of the VERSA-2GIG is enrolled using Loop 2 and has a pop-off cover. Both devices have a yellow inner board that allows you to differentiate them from the VERSA-GE Sensors (blue board) and the Honeywell 5800MINI Sensors (red board).

This change should not affect the performance of the VERSA-2GIG or its compatibility. At this time, we are only aware of changes to the VERSA-2GIG Sensors. We have not received any news of changes for the VERSA-GE Sensors or the Honeywell 5800MINI Sensors. Alarm Grid will produce an update post if we learn of any changes to these sensors.

At this time, we cannot control which version of the VERSA-2GIG Sensors you will receive when placing an order. Some old-style sensors are still being sent out, while other customers are reporting that they have received the new style. It is even possible that you may receive a mix of old and new VERSA-2GIG Sensors with a system kit. Please be aware that these sensors operate exactly the same, and you should not notice any difference in device performance. The new-style VERSA-2GIG Sensors work just as well as the old-style ones. The only functional difference is the cover.

Remember, if you have a new-style VERSA-2GIG Sensor with a slide-off cover, it will enroll to your system using Loop 1. If you have an old-style VERSA-2GIG Sensor with a pop-off cover, it will enroll to your system using Loop 2. You can always auto-enroll your sensor, and the Loop Number should populate automatically. We recommend auto-enrolling whenever possible to check device communication and to avoid making a mistake when manually entering the Serial Number.

If you have any questions about this change, please reach out to us at support@alarmgrid.com, or call us at (888) 818-7728 during our regular business hours of 9am to 8pm EST M-F. We look forward to hearing from you.