Home Security Blog

There is an important key change coming to the way that Alarm.com Video Analytics are handled. Notifications for Alarm.com Video Analytics are now being as soon as a person, vehicle, or animal is detect. A notification will link to the live camera feed so that you can view the action.

This new change will apply to all new and existing Alarm.com Video Analytics recording rules. Previously, Alarm.com Video Analytics notifications were sent out once the associated video clip was fully uploaded. The one exception to the change is for email and SMS text message Video Analytics notifications that are specifically configured to "Attach a Video Clip" are still going to be sent after the video clip has been uploaded.

According to Alarm.com, the new method with the notification linking to the associated camera video feed will make it easier for users to quickly access the associated camera so that they can gain knowledge of the situation at-hand in a faster time period than they were able to previously. While this might seem like a relatively small change here, it will actually have a pretty big impact on Alarm.com Video Analytics and how they are used.

Remember that Alarm.com Video Analytics are based around Video Analytics Rules. If you want to add a new Video Analytics Recording Rule through the Alarm.com Website, then start by logging into your Alarm.com account through a compatible web browser. Choose Video on the left-hand side, then Recording Rules, followed by Add New Rule, and then Video Analytics. Remember that your alarm monitoring provider must have enabled both video monitoring and Video Analytics on your account before you will be able to do this. Alarm Grid customers must have a Platinum Plan (Self or Full) or an Alarm Grid Video-Only Plan to use any form of Alarm.com Video Analytics.

Do you have any thoughts on this seeming small, yet major change to Alarm.com Video Analytics notifications? Share your viewpoint in a comment down below. Maybe you like this change, because it will allow you to access your cameras more quickly? Or maybe you think that Alarm.com should have just left things alone. In any case, we would love to see some discussion. And don't forget to to stay tuned to our blog for more security news coming soon.

If you are a regular reader of the Alarm Grid Blog, then you have likely heard us joke about the current paltry selection of Total Connect 2.0 IP Cameras from Resideo (formerly Honeywell). But what if Resideo were to revamp their camera lineup? Today, we speculate what could be possible.

First, let's look at the currently available TC2 IP Cameras. There are two (2). We have the Honeywell IPCAM-WIC1 and the Honeywell IPCAM-WIC2. Both are indoor cameras, with the IPCAM-WIC1 being a "budget" 720p camera, and the IPCAM-WIC2 as the premium 1080p camera offering. There isn't anything inherently wrong with these cameras, and the IPCAM-WIC2 is actually quite nice. However, since the Honeywell IPCAM-WOC1 was discontinued, there is no outdoor camera for the lineup, and if you compare this selection with the Alarm.com Camera Lineup, quite frankly, Resideo should feel embarrassed.

But it doesn't necessarily have to be this way! Not only have we heard grumblings about some new cameras coming out of the Resideo pipeline, we're also happy to do our very own speculating. So let's play pretend for this blog post, and imagine what might be possible from Resideo and Honeywell Home.

With the Honeywell Home PROA7PLUS positioned as one of the leading next generation security panels, just imagine what could be possible if it had a robust and complete camera lineup to accompany it. Actually, you don't have to imagine, because we're going to do it for you. Right here, right now, we're going to drop some ideas and speculation about what Resideo could be cooking up. Who knows, maybe we'll see some of these thoughts become reality at ISC West 2021 next month.

We would want these cameras to look sleek and impressive. They should be easy to pair with your Total Connect 2.0 account. How about QR code pairing through the Total Connect 2.0 Mobile App? That would be quick and easy. WPS pairing for WIFI connectivity would likely be possible, but there should also be more secure Access Point (AP) mode pairing for greater security. We wouldn't be too disappointed if WPS pairing were dropped entirely, just as long as there were an efficient and simple process for network connectivity. Maybe they could do something where you connect an initial camera to the network, then other cameras could connect with that "Master Camera" and automatically pair with the network? There would be some security kinks to iron out there, but that sounds quick, easy and simple, which is optimal for end-users. And actually, if you were to use a power over ethernet setup, then you wouldn't even need WIFI connectivity.

Here's a quick and easy idea that consumers will love - a simple color option for each camera. Release each camera in the classic white coloring option, as when you think of security cameras, you usually think of white. But what about also a jet black color option? The black-colored cameras would be well-hidden in the darkness of night and catch intruders off-guard. Why hasn't this been done yet? Plus, consumers love fun choices like this. It's simple, sure, but black-colored security cameras would be a major market hit. Speaking of night time, we would want these cameras to have IR night vision capabilities for recording in the dark. We wouldn't expect anything less from these top-of-the-line cameras.

How would you go about viewing these camera feeds? Well obviously you would be able to access them remotely through the Total Connect 2.0 platform. You could use the website or mobile app. We also know that there would be connectivity through the PROA7PLUS Alarm Panel, and the PROWLTOUCH Keypad. For the most part, that would probably be enough. But let's get creative here. What if you put an HDMI or other type of port on each camera, and then you could connect a loose monitor just to get a quick peak at the camera's feed while you are installing the devices in the field? Maybe that's packing too many features into a tight space, but at the same time, why not?

Speaking of, we have to wonder how the cameras would receive power. You could do what Alarm.com does. They have a "residential" lineup of cameras that uses simple, yet effective, plug-in transformers. They're quick and dirty, but they get the job done. Then there's also a "commercial" lineup that uses Power over Ethernet (PoE). We'll give you the best of both worlds here and just say that each camera should have both options available. Bundle a transformer, and release a universal "extension cable" for those who need a long wire run. But at the same time, allow a user to lose that transformer and just run an ethernet cable for both network and power connectivity. More choice, more options, more power.

And also, why not battery power? Allow a camera to run off AA batteries or CR123A batteries, and make something truly wire-free. Battery power is only becoming more impressive as technology grows and changes. This could also be a backup power option during electrical outages. Maybe you could do something where the camera pairs with the PROA7PLUS like a sensor, and then it uses its cellular connection (via the PROLTE-A or PROLTE-V) to remain connected to the network even if the internet is down? This might be a bit unrealistic at the present time, but hey, we can dream right?

This post wouldn't be complete without talking about some camera types. We will start simple. There would have to be a universal go-to and basic indoor model. The equivalent of the ADC-V523 (for those familiar with Alarm.com Cameras). This would be a versatile device that you could use in pretty much any indoor installation. And if there's an indoor model, then there would also have to be an outdoor model, ala the ADC-V723. And why not have a budget model, aka the ADC-V515. Maybe tone down some of the features and give an affordable option. There could even be a budget outdoor camera, the fictitious ADC-V715, which doesn't even exist... yet.

Would Resideo and Honeywell Home release their own version of the ADC-V622-WELL? Sure, why not. Actually, Honeywell has definitely attempted a "social camera tower" device before. We do like the idea. An interactive camera with a call button and two-way voice. It's creative and unique, and it could absolutely be a hit. Imagine pressing the camera call button and then getting an alert on the panel or via push notification from Total Connect 2.0. This is an excellent option for those taking care of sick relatives, or aging family members.

We would like to see some dome camera options. Dome cameras are easy to hide, and they offer some excellent installation opportunities. How about a small dome camera like the ADC-V821, and a big dome camera like the ADC-VC826. Maybe the big dome camera would get a boost in specs and capabilities, like pan/tilt and possibly even zoom, to take advantage of the larger size. Resideo Dome Cameras and Honeywell Home Dome Cameras for residential and commercial applications alike. And they would certainly be suitable for outdoor use as well. The dome design practically screams "Install Me Outside Please!", and we don't see why not.

Lastly, we want to go out with a BANG! here. You know the ADC-VC836 Turret Camera? Well imagine a design like that, but then you can go into Total Connect 2.0 to remotely control the turret camera's position like a robot. A remote control camera, kinda like a stationary drone. Wait, a Drone! Resideo Drone Camera and Honeywell Home Drone Camera! Why not just release a Resideo Drone or a Honeywell Home Drone? Pair it with your Total Connect 2.0 account, select the Drone Camera, and then use your phone or computer as a controller for it. Take flight and scope out your home or business with your drone camera. An outdoor model could charge using solar power. Fly around and capture all of the activity recorded. Not only would you get amazing coverage, it would be COOL.

We can just imagine spending hours flying our TC2 Drone Camera. If privacy concerns are a thing, you could set the camera to only record footage while it is within the assigned property address. We're strictly talking for monitoring your own property. Still, the possibilities of flying a mini TC2 drone around a 3-story house or multistory company office would be pretty neat. Imagine the drone riding in the elevator and then surprising your co-worker as the door opens! Two-way voice capabilities would allow you to communicate through your drone in real-time. Again, we know a drone might a bit scary and open up some unnecessary espionage opportunities. But this is too cool not to at least imagine and dream about.

None of the ideas or topics discussed in this blog are known to exist, and this is just purely conceptional imagination "what-if" at this point. The odds of Resideo actually showcasing a drone camera at ISC West 2021 are slim-to-zero. At some point, the camera fairy tales in this post became exactly that - fairy tales. That's not going to stop Alarm Grid from thinking about a day in the future where Resideo has an incredible lineup of security cameras, and we laugh the fact that at one time it was just the IPCAM-WIC1 and IPCAM-WIC2.

What can we expect out of Resideo as far as new cameras at ISC West 2021? Well a drone, or even a stationary turret camera ala an ADC-VC836-like design that you can actually use for 360-degreee control through Total Connect 2.0 is probably asking too much. Let's come back down to planet Earth for a second. It's fair to expect a new indoor and outdoor camera for use with Total Connect 2.0. Seriously, TC2 users deserve a better camera selection. And even if we saw some nice dome cameras for the platform, we would probably still be blown away. Resideo has to up their camera game. Why not give the public something impressive?

Can you dream big on some Resideo and Honeywell Home Camera ideas? Or has this writer lost his marbles? Leave your thoughts in a comment down below. What would you like to see out of a next generation of Honeywell IP Cameras? What's realistic, and what's a fun fantasy idea? We clearly crossed the line into the realm of fantasy in this post, but why not get a little creative once in awhile? Security is fun, don't ever forget that. Speaking of fun, stay tuned to the Alarm Grid Blog for more security news and other content coming soon.

We have a short but sweet announcement to make today, as we now have the DSC PowerSeries NEO ICON Keypads available. These are the equivalent of Fixed English Keypads for the DSC PowerSeries NEO. They are great if you need additional keypads to accompany one or more Alphanumeric Keypads.

The following four (4) DSC ICON Keypads are now available for DSC PowerSeries NEO owners:

• DSC HS2ICN - Wired FE Keypad
• DSC HS2ICNP Wired FE Keypad w/ Proximity Tag Support
• DSC HS2ICNRF9 Wired FE Keypad w/ PowerG Support
• DSC HS2ICNRFP9 Wired FE Keypad w/ Proximity Tag & PowerG Support

The main thing to keep in mind with these ICON Keypads is that they are essentially Fixed English Keypads. This means that they do not display system status, and instead just display the current time. More importantly, they also cannot be used to program the panel, because they will not display zone settings.

In other words, you should only use one of these keypads as an extra keypad controller to accompany an existing Alphanumeric Keypad. You can use the Alpha Keypad a the primary controller and for making system changes. Then the new ICON Keypad can go in a secondary location, such as by your back door or in your master bedroom.

If you are looking for just one Alphanumeric Keypad, then a good option is the DSC HS2LCDRF9 N, as that keypad includes the built-in PowerG Transceiver so that you can begin adding wireless sensors. If you already have a standalone PowerG Transceiver, then you can get the Alpha Keypad without the built-in PowerG Transceiver, the DSC HS2LCD N Keypad or the DSC HS2LCDP N Keypad With Proximity Tag Support. Remember that we sell Proximity Tags for the DSC PowerSeries NEO here in a packs of eight (8).

What do you think of the DSC PowerSeries ICON Fixed English Keypads? Do you think you will add one to your DSC PowerSeries NEO Security System? Let us know in a comment down below. We would love to hear your thoughts. And stay tuned to the Alarm Grid Blog for more security news and product announcements coming soon!

We have a short but exciting announcement today, as new Qolsys IQ Smart Water Valve Kits are now available! There are two (2) kits available, including the Qolsys IQWV908-KIT-PG that uses PowerG communication and the Qolsys IQWV908-KIT-SL that uses 319.5 MHz S-Line communication.

Both of these new kits include two (2) components. The centerpiece is a smart water valve that uses Z-Wave Plus V2 700-Series communication technology. This piece of hardware has an adaptive torque output and can be self-installed on most quarter-turn (1/4 turn) ball valve pipes ranging from one-half inch (1/2") to one and a quarter inch (1-1/4"). Wireless communication is kept super secure using the optional Z-Wave S2 Security Protocol, which is supported by most 500-Series and 700-Series Z-Wave controllers.

Some of the best aspects of the Z-Wave 700-Series Qolsys IQ Smart Water Valve include its ability to be used indoors or outdoors (keep out of direct sunlight), it has an adaptive torque rating of up to eight (8) Nm, and its ingress protection rating of IP66, making it both waterproof and dustproof. The water valve is nice and compact at just 14.8mm x 9.6mm x 13.3mm in size, and it weighs a mere 603g. It can be used reliably in temperatures ranging from 14°F to 121°F. Best of all, it can be self-installed, without the need to hire a plumber.

The other component of the kit is a wireless flood sensor that is ideally used in conjunction with the smart water valve. Depending on the kit you choose, you will get either the DSC 915 MHz PowerG PG9985 Flood Sensor or the Qolsys 319.5 MHz S-Line QS5536-840 Flood Sensor. The PowerG option is good if you have any version of the Qolsys IQ Panel 2 Plus or a DSC PowerSeries NEO Panel with an added PowerG Transceiver. Meanwhile, the S-Line variant is good for the original non-Plus Qolsys IQ Panel 2 or even something like a wireless Interlogix Alarm Panel.

The biggest advantage to using the Z-Wave smart water valve and the wireless flood sensor together is that you can create an automated scene to turn the water off in an emergency situation. The way that this works is that when the flood sensor detects liquid, it will send a signal to the centralized alarm control panel. This faulted zone can then be programmed to trigger an automated smart scene that tells the Z-Wave valve to shut off the water supply. This can stop the flooding and potentially save you thousands of dollars in serious damage. If you've ever experienced the devastation of a major flood, then you will realize this importance.

Do you have any thoughts on this new smart water valve and flood sensor combination package from Qolsys? Share your viewpoint in a comment down below. We would love to hear what you have to say. It's great to see Qolsys taking such initiative in the field of flood damage prevention. Who knows, maybe Resideo and Honeywell Home or 2GIG and Nortek will release their own smart water valve in the near future (pure speculation). From what we can tell Qolsys really put out a winner here, and we're really excited to see it in action. Anyway, that's all the news for now. Keep posted to the Alarm Grid Blog for more updates in the security and smart home automation world coming real soon!

With ISC West 2021 quickly approaching, we thought it would be nice to take a quick look at various security manufacturers to speculate about what they might be presenting. Keep in mind, this is purely speculation. None of this is guaranteed, it's just our guess as what we might see.

Before you read about the various security and smart home automation offerings that we might see, make sure to check out our earlier post on the ISC West 2021 Health and Safety Guidelines, if you haven't already. Remember that this year's ISC West runs from Monday, July 19th through Wednesday, July 21st at the Sands Expo Center in Las Vegas, NV. With that out of the way, let's begin discussing some manufacturers.

Resideo

Resideo will certainly want to showcase its new system, the PROA7PLUS. We would expect to see both the Honeywell Home PROA7PLUS and the virtually identical Resideo PROA7PLUSC showcased prominently at ISC West 2021. You will also likely see its accompanying hardware, including the PROLTE-A and PROLTE-V Communicators, the PROTAKEOVER Legacy Receiver Module, and the PROSIX Series Encrypted Wireless Sensors. All of this aforementioned equipment is already available for purchase.

As for new products, we would be surprised if we didn't see Resideo releasing a new lineup of security cameras, perhaps under the Honeywell Home brand. With the Honeywell IPCAM-OC1 Outdoor Camera being discontinued, the selection of Total Connect 2.0 Cameras is pretty weak compared to the selection of Alarm.com Cameras. As such, a user getting security cameras as part of their system is more likely to choose an Alarm.com System than a Resideo System that is being used with Total Connect 2.0. We're sure Resideo wants to change that, so it would be disappointing if we don't see some new Resideo Cameras.

Lastly, we have heard rumors of a new hardwired system that would essentially replace the Honeywell VISTA Series. This lineup of wired panels is rumored to be named the Honeywell Home PROH8PLUS, and it would be a fully hybrid system able to support both hardwired sensors and wireless sensors, possibly using the PROTAKEOVER Module Legacy Receiver. While there's nothing inherently wrong with VISTA Alarm Panels, we might see Resideo updating their technology a bit, and bringing the hardwired selection lineup to the next level.

Nortek & 2GIG

From what we can tell, Nortek is very pleased with their 2GIG Edge Security System, and it's a fair bet that that 2GIG Edge Alarm Panel will be the main highlight of the 2GIG and Nortek Booth at ISC West 2021. And it's rightfully so, as the Edge is a highly advanced alarm panel with great features like facial recognition and Bluetooth disarming. What remains to be seen if Nortek will decide to roll-out a lineup of 2GIG Edge-exclusive encrypted sensors, perhaps to break away from the existing 2GIG eSeries Sensors that work with the Edge and the older GC2e and GC3e. However, we haven't actually heard anything about new 2GIG Edge Sensors, so that is just pure speculation. That being said, you can bet on 2GIG to heavily feature the 2GIG Edge Alarm System in their booth. If you haven't seen it an action yet, then ISC West 2021 figures to be a great opportunity. The 2GIG Edge and its accessories are currently available for purchase from Alarm Grid.

Qolsys

Qolsys has been secretly working away on some new alarm panels, and we figure ISC West 2021 to be right opportunity for Qolsys to unveil them to the public. The company needs to make a big splash to keep up with household names like Honeywell Home and 2GIG. We can expect to see the new Qolsys Budget Panel, the Qolsys IQ Hub, which we have been expecting for quite some time.

This may also be the chance for Qolsys to unveil their big new flagship alarm panel, the Qolsys IQ Panel 4. We are expecting the IQ Panel 4 to be a tremendous juggernaut in the home security industry, as the new alarm system will boast a Snapdragon Chipset running Android 9 Software, and come complete with an 8MP front-facing camera, all-new lifestyle automation pages, and oodles of great features. There's a chance Qolsys might be secretive and keep the IQ Panel 4 tucked away, but we would be pretty sad if we don't get to see it at ISC West 2021. We are hopeful that the Qolsys IQ Panel 4, Qolsys IQ Hub, and Qolsys IQ Router will be made available later this year.

DSC

Digital Security Controls (DSC) has been at the forefront of Canadian Home and Commercial Security for years. But now that both DSC and Qolsys are under the Johnson Controls banner, we may see considerably less of the DSC brand out in the limelight. As security systems are being made "sexier" and flashier to fit-in with a modern home, a bulky wired alarm system like the DSC PowerSeries NEO just isn't suitable for most residential applications. We don't expect DSC to be completely absent from ISC West 2021, but don't be surprised if Johnson Controls is putting Qolsys out on center stage, while DSC may remain more in the background as more of a commercial security option. The PowerSeries NEO and the existing DSC Iotega are both candidates to be featured in ISC West 2021. We have not yet received any word on possible "new" DSC equipment that may be featured.

Alarm.com

Alarm.com always has a prominent showing at ISC West, and we don't expect this year to be any different. However, we aren't really sure what to expect from Alarm.com, if anything new. It's possible that Alarm.com might try to make ISC West 2021 more of a quiet showing. It's likely that the Alarm.com Smart House will return, allowing users to interact with the latest smart home automation and video surveillance offerings from Alarm.com. The ADC platform strives to be a leader in terms of home automation, and they will likely use this ISC West to showcase their complete array of offerings and how their equipment can be used together to create a complete smart home. We are also regularly pleased with all the Alarm.com Video Camera offerings, so it's fair to expect their cameras to make an appearance. We aren't necessarily expecting any new cameras, but we definitely anticipate seeing great devices like the ADC-V523, ADC,V622-WELL, ADC-V723, and ADC-VDB770 Doorbell Camera.

Z-Wave Alliance

You can always bet on seeing the Z-Wave Alliance tucked away in the back corners of the ISC West Showroom Floor. Z-Wave wireless communication has secured itself as the leading protocol in smart home automation, and it continues to dominate for good reason. ISC West 2021, figures to be a huge opportunity for Z-Wave 700-Series Technology to really present itself to the public and showcase its rich capabilities. Z-Wave 700-Series, also being called Z-Wave Plus V2, promised extended wireless range, and a longer battery life of at least ten (10) years. Z-Wave Plus V2 sensors are also required to be built on the Z-Wave S2 Security Protocol, thereby making them more secure than most Z-Wave 500-Series devices.

Of course, the Alarm Grid team will be returning to ISC West 2021, ready to post about the latest security offerings from all the major brands. Be sure to keep-up with the Alarm Grid Blog if you can't make it to ISC West 2021 yourself. We will let you know the latest news for Resideo, Honeywell Home, 2GIG, Qolsys, and more as we attend the event in Las Vegas, NV. Stay tuned for more ISC West 2021, especially as we get closer to the even on July 19th through July 21st. We're super excited, so get ready for more content coming soon.

If you use an Interlogix Alarm System with Alarm.com, then you can expect a firmware update for your system's LTE communicator. The firmware update will be automatic, and no action will need to be taken. Interlogix Simon Panels, NetworX Panels, and Concord4 Panels will receive the update.

If you haven't upgraded to an LTE communicator yet, then make sure to do so as soon as possible. The 3G Sunset is going to occur on January 31st, 2022 for AT&T and December 31st for Verizon. If you are not aware of the 3G sunset, then please read this blog to get acquainted. This upgrade is very important to ensure that you do not experience a loss of service.

We want to mention that each firmware update is just a general update designed to improve the user experience. Each update is being pushed down automatically, at no cost to the user. No action is needed on your end, just have your system online and connected with the Alarm.com servers, and everything will be taken care of.

Please note the update according to your Interlogix System:

• Interlogix Concord4 - Firmware Update 189d
• Interlogix NetworX - Firmware Update 189a
• Interlogix Simon XT, XTi, XTi-5, XTi-5i - Firmware Update 191f

Additionally, if you use a Honeywell VISTA System with an Alarm.com SEM (not AlarmNet or Total Connect 2.0), then you will also be getting a pair of automatic system updates. All VISTA Systems using Alarm.com SEMs will receive the SEM VISTA 187i Upgrade and the 1.61 Firmware Upgrade. Again, both updates are automatic, and they are being provided at zero cost.

That's all the news for now. If you have any of the aforementioned systems on Alarm.com, then you can expect the automatic firmware update. If you are monitored by Alarm Grid and you are having any trouble with your system, please email support@alarmgrid.com. Please keep in mind our usual business hours of 9am to 8pm ET M-F.

Alarm.com users are likely already aware of their ability to protect their accounts using two-factor authentication (2FA). Now Alarm.com is expanding their 2FA offerings to allow the use of third-party authenticator apps. This is a great new option for keeping your ADC account secure.

By adding an additional layer of security to your Alarm.com account through the use of two-factor authentication, you can prevent malicious intruders from accessing your account and your Alarm.com Security System, through your username and password alone. Existing 2FA methods allowed users to verify their identities from an email or text message. Alarm.com can also be set up so that it knows to "trust" a verified device, and only require 2FA on a new "unrecognized device" that is being used. A user will have the option to "save" a new device so that it is trusted, and 2FA isn't required the next time a user logs in.

Additionally, Alarm.com is now allowing users to set up 2FA in the form of an authenticator app. The way that these apps work is they generate a new secret code about every minute. This code is typically 5 to 7 digits in length, but it can vary. When a user goes to log into their account, after entering their username and password, they must open the authenticator app, and provide the current randomly generated code that is only good for about a minute or so. As soon as a new code is generated, the existing one is thrown out, and only the new code will be usable for a short time period until the next code is generated. If you choose to use this type of authentication, be sure to follow all instructions, particularly in the event that you get a new device, such as a new phone. Each authenticator app will have a specific process you should follow.

Alarm.com customers will have a variety of authenticator apps that they can choose from, including Google Authenticator, Microsoft Authenticator, LastPass, Twilio, Duo, and more. Most of the apps have been said to work without any issue, However, an issue has been identified when using the Duo App, as generated codes may not be valid for the first fifteen (15) seconds after being generated. If you are having trouble using the feature, then you should reach out to your monitoring company for further assistance.

Fortunately, setting up 2FA on your Alarm.com account is very easy, It can be done through the mobile app or website. To use the mobile app, login to your account through the Alarm.com Mobile App on Android or iOS. Click the three (3) horizontal bars menu button in the upper-left corner, and then choose Login information. Then select the Two-Factor Authentication option. You will be asked to receive the code using an Authentication App, Email, or Text Message. Choose Authenticator App to have a QR code generated to scan.

If you are using the website, then the process is just as simple. Login to your Alarm.com account through a compatible web browser. Choose Settings on the left-hand side, followed by Login Information. Then under Login Security, choose the option for Two-Factor Authentication. You can then follow the on-screen prompts to set up 2FA through an authentication app, email, or text message. If you are having any trouble, then you should reach out to your monitoring provider for additional help.

Do you have any thoughts on Alarm.com Two-Factor Authentication? Do you use it to help keep your account safe, Will you be taking advantage of the ability to use authenticator apps? Let us know what you think in a comment down below. We would love to hear what you have to say. Remember to stay posted to the Alarm Grid Blog for more security system news coming soon!

Alarm Grid is offering new Alarm.com System Enhancement Modules (SEMs) for Honeywell VISTA P-Series Alarm Panels. The ADC-SEM300-VT-AT (AT&T LTE & IP) and ADC-SEM300-VT-VZ (Verizon LTE & IP) are both available now. They provide reliable alarm monitoring and Z-Wave Plus capabilities.

If you aren't familiar with Alarm.com System Enhancement Modules (SEMs), they are basically cellular communicators that allow hardwired alarm panels to connect with the Alarm.com servers. The reason why SEMs for Honeywell VISTA Systems are so interesting is because normally these Honeywell-manufactured Alarm Panels are used in conjunction with the Resideo AlarmNet Servers and the Total Connect 2.0 Security Notification and Automation Platform. With an SEM, you can take control of your Honeywell VISTA Alarm Panel and instead have it communicate with the Alarm.com servers and the Alarm.com platform. Alarm Grid customers can choose from a variety of alarm monitoring plans to use with SEMs, including our Gold and Platinum Level Plans (Self & Full) and our Cellular-Only Plan. You can learn more about all our monitoring plans in this comprehensive blog post.

When you break-down what Alarm.com offers versus Total Connect 2.0, both platforms are remarkably similar. However, there are some cases where a user may prefer to go with Alarm.com over Total Connect 2.0. The biggest reason why we can think of is that the user wants to take advantage of the robust selection of Alarm.com Security Cameras. If you compare the selection of Alarm.com Cameras versus the Total Connect 2.0 Camera Selection, then it's clear that Alarm.com is (at least for now) the hands-down winner. Even if you aren't using security cameras in your setup, maybe you want a better integration with the Alarm.com Smart Water Valve, or maybe there's an Alarm.com Demand Response Program in your area that you want to take advantage of. In any case, if you have a VISTA P-Series Panel (e.g. VISTA-10P, VISTA-15P, VISTA-20P, VISTA-21iP, VISTA-21iPLTE), then an Alarm.com SEM will give you the option of using their services instead of AlarmNet and TC2.

When you compare the new "300-Series" SEMs with the previous VISTA SEMs, the ADC-SEM210-VT-AT and the ADC-SEM210-VT-VZ, the new ones have a couple of advantages. For one, the new 300-Series SEMs utilize much lower power consumption at just 230mA. The new modules also have the ability to be used without an external power supply, which was required with the older modules. In the setup without an external power supply, all of the power is supplied from the panel. However, you can still use an external power supply with the new SEMs if you do not have 230mA available from your panel. Also, the new 300-Series SEMs have new externally-facing LED status lights that are easier to read when needed.

Just like the prior editions, the new ADC-SEM300-VT-AT and ADC-SEM300-VT-VZ offer ultra-reliable connectivity across both an LTE cellular network and internet service using a wired ethernet connection. In addition, the new SEMs also return with Z-Wave Plus functionality, thereby allowing you to build a robust and complete smart home network around your security system. If you have been wanting to setup smart devices around your Honeywell VISTA Alarm System for use around the Alarm.com Security and Automation Platform, then these new SEM devices are perfect for the job at-hand. They are available right now and ready for use with Alarm Grid!

Do you have any thoughts about the new Alarm.com 300-Series SEMs, the ADC-SEM300-VT-AT and ADC-SEM300-VT-VZ? Would you consider switching over your Honeywell VISTA System to the Alarm.com Platform from Total Connect 2.0? Or maybe you're already happy with using your VISTA System with its current LTE cellular communicator? Let us know your thoughts in a comment down below. We would love to hear what you have to say. We always make sure to cover new product releases and the latest security system news, so make sure to stay tuned to the Alarm Grid Home Security Blog for more great content coming soon!

Alarm Grid will be closed from Saturday, May 29 through Monday, May 31, in observance of Memorial Day. During this time, we will not be answering our phones, responding to online chat questions, or responding to emails. We will reopen on Tuesday, June 1. We apologize for any inconvenience.

Remember that our central station partner Criticom Monitoring Services for United States customers and Rapid Response for those in Canada will both remain open during this time. You can reach out to them to put your system on test mode or to cancel a false alarm. To contact CMS, please call our number, (888) 818-7728, and then choose option [9]. If you need to reach Rapid Response, then you can call (800) 932-3822.

All other inquiries can be sent to our support email support@alarmgrid.com. Please keep in mind that we will likely be encountering a high-volume of emails on Tuesday morning, so we ask for your patience as we do our best to respond as quickly as possible. However, we will make sure to reply to all emails at our earliest opportunity.

We hope that everyone has a safe and fun Memorial Day Weekend. This day is meant to honor those who have made the ultimate sacrifice in keeping us safe. Please take a moment to think about those who have helped make this holiday possible. We look forward to returning to work on Tuesday, please check-in for a new blog post at that time.

Alarm Grid has learned that Alarm.com now supports Ecobee WIFI Thermostats. Users can integrate Ecobee devices with their Alarm.com accounts for operation through the Alarm.com website and mobile app. The Ecobee Thermostat integration can be added to any Alarm.com account using the website.

According to Alarm.com, the Ecobee SmartThermostat, the Ecobee4 Thermostat, and the Ecobee3 Lite Thermostat are all eligible for the integration. Users who set up the integration will be able to control their Ecobee WIFI Thermostats alongside their other automation and security devices in the Alarm.com website and/or mobile app. If you are an Alarm.com user, and you already have a compatible Ecobee device, or you are thinking about getting one, then now is a great time to get started!

Ecobee says that their smart thermostat devices help users save up to 26% on their heating and cooling costs. The company offers a nice selection of ENERGY STAR certified thermostats, as well as their own suite of smart home automation products. Not only does Ecobee work to help customers save money on heating and cooling costs, but they also strive to create a more sustainable world as part of their dedicated efforts.

One interesting thing about Ecobee is that the company has a long-standing relationship with an Alarm.com subsidiary called EnergyHub. Since 2015, Ecobee and EnergyHub have worked together on more than 40 special programs designed to deliver grid management services to utilities and wholesale market operators. Thus, it's no surprise that Ecobee and Alarm.com have come together to create this new partnership.

Any Alarm.com user with a compatible Ecobee Thermostat can get started with the integration by setting it up through the Alarm.com website. Simply be sure the Thermostats or the Lights & Thermostats service package is enabled on your account. Then, login to Alarm.com using a compatible web browser, choose Settings on the left-hand side, followed by Manage Devices, then press the blue "Add Device" button in the upper-right, pick Thermostat, and then select the option for Ecobee. From there, just follow the on-screen instructions to complete the integration!

If you have any thoughts about the new Ecobee integration for Alarm.com, or if you want to share your experience with Ecobee Thermostat devices in general, then please leave a comment down below. We would love to hear what you have to say. Also, if you're excited about this new integration and what it can offer, then please let us know. It's great to see Alarm.com continuing to expand their smart home automation and energy-saving ecosystem. Stay tuned to the Alarm Grid Blog for more security and automation news coming soon.